{{>toc}}

h1. AirOS

http://www.ubnt.com/wiki/RF_Compliance

For example, if you select  5805 MHz (40 MHz channel) and Below, the radio will use  (5775 to 5795 MHz) + (5795 to 5815 MHz), 

but if you select   5805 MHz (40 MHz channel) and Above, the radio will use  (5795 to 5815 MHz) + (5815 to 5835 MHz).

h2. v5.3.5

http://wiki.ubnt.com/AirOS_5.3

Channel width 5/10/20/40

TX power min max dBm

Loco    4  23

NS      8  27

NB      4  23

Rocket  -4 27

LocoM2 5/10/20/40 dBm 5-23

h2. v5.5

http://www.ubnt.com/download#doc

http://www.ubnt.com/downloads/guides/airOS/airOS_UG_V55_3-20-12.pdf

Country Compliance Mode Frequency 4920 Mhz a 6100 MHz

Channel width 3/5/8/10/20/25/30/40

TX power min max dBm

Loco    4  23

NS     -4  27

NB     -8  23

Rocket -4  27

LocoM2 3/5/8/10/20/25/30/40 dBm 5-23 Freq 2312 a 2732 MHz

IPv6 supported in command line ping6 fe80::xxx%br0 works

h2. AirView test

Lab on table same room compliance mode 5.5

- one NSM5 AP WDS

- one LocoM5 STA WDS 1 meter

- one NBM5 head (without dish) right in between Loco and NS running AirView

- clear airview

- 300 second iperf client between netbook behind NSM5 to iperf server on locoM5

- save airview screenshot

h3. First batch testing narrow channels 5240 with 5200-5300 airview:

3 5 8 10 20 width :

!5240-3.png!

!5240-5.png!

!5240-8.png!

!5240-10.png!

!5240-20.png!

h3. Second batch testing large channels 5300 with 5200-5400 airview:

0 is no emission to verify noise then 10 20 30 40 width :

!5300-0b.png!

!5300-10b.png!

!5300-20b.png!

!5300-30b.png!

!5300-40b.png!