• Contenu
• AirOS
  • v5.3.5
  • v5.5
  • AirView test
    • First batch testing narrow channels 5240 with 5200-5300 airview:
    • Second batch testing large channels 5300 with 5200-5400 airview:

AirOS¶

http://www.ubnt.com/wiki/RF_Compliance

For example, if you select 5805 MHz (40 MHz channel) and Below, the radio will use (5775 to 5795 MHz) + (5795 to 5815 MHz),
but if you select 5805 MHz (40 MHz channel) and Above, the radio will use (5795 to 5815 MHz) + (5815 to 5835 MHz).

v5.3.5¶

http://wiki.ubnt.com/AirOS_5.3

Channel width 5/10/20/40

TX power min max dBm
Loco 4 23
NS 8 27
NB 4 23
Rocket -4 27

LocoM2 5/10/20/40 dBm 5-23

v5.5¶

http://www.ubnt.com/download#doc
http://www.ubnt.com/downloads/guides/airOS/airOS_UG_V55_3-20-12.pdf

Country Compliance Mode Frequency 4920 Mhz a 6100 MHz
Channel width 3/5/8/10/20/25/30/40

TX power min max dBm
Loco 4 23
NS -4 27
NB -8 23
Rocket -4 27

LocoM2 3/5/8/10/20/25/30/40 dBm 5-23 Freq 2312 a 2732 MHz

IPv6 supported in command line ping6 fe80::xxx%br0 works

AirView test¶

Lab on table same room compliance mode 5.5
- one NSM5 AP WDS
- one LocoM5 STA WDS 1 meter
- one NBM5 head (without dish) right in between Loco and NS running AirView
- clear airview
- 300 second iperf client between netbook behind NSM5 to iperf server on locoM5
- save airview screenshot

First batch testing narrow channels 5240 with 5200-5300 airview:¶

• 3 MHz
  
• 5 MHz
  
• 8 MHz
  
• 10 MHz
  
• 20 MHz
  

Second batch testing large channels 5300 with 5200-5400 airview:¶

• no emission to verify noise
  
• 10 MHz
  
• 20 MHz
  
• 30 MHz
  
• 40 MHz