{{>toc}}

h1. DPDK

Traitement haute performance en logiciel, 10 Gbit/s en petit paquets line rate

h2. Liens

* http://dpdk.org
* [[AtelierPPS2012]]

h2. Misc

* Intel PCI id http://www.intel.com/support/network/sb/cs-012904.htm
* http://www.intel.com/content/www/us/en/ethernet-controllers/ethernet-products.html?iid=embed_portal+hdprod_ethernet#s1=Gigabit%20Ethernet&s2=all&s3=all
* Intel Pro/1000 PT vs CT http://hardforum.com/showthread.php?t=1386042
* http://images.ncix.com/forumimages/C9864B87-583B-10FB-B0DE80742781CE07.jpg
* http://www.intel.com/content/www/us/en/ethernet-controllers/ethernet-controllers.html#s1=all&s2=82572EI&s3=all
* http://www.intel.com/content/www/us/en/ethernet-controllers/ethernet-controllers.html#s1=all&s2=82574L&s3=all
* https://github.com/Pktgen/Pktgen-DPDK
* Evaluating the Suitability of Server Network Cards for Software Routers http://kfall.net/ucbpage/papers/snc.pdf

h2. Note sileht dpdk:

Extract from: http://www.intel.com/content/dam/www/public/us/en/documents/guides/intel-dpdk-getting-started-guide.pdf

h3. configuration hugepages:

* 2M (1024*2k): hugepages=1024 (at runtime: echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages)
* 4G (4x1G): default_hugepagesz=1G hugepagesz=1G hugepages=4 (only works at boot time via grub)

<pre>
mkdir /mnt/huge
mount -t hugetlbfs nodev /mnt/huge
</pre>

h3. Compile and load modules:

_Note: source tools/setup.sh is a helper tools for this but works only with IGB driver not e1000e_

<pre>
# apt-get install make gcc linux-headers-amd64
# make config T=x86_64-default-linuxapp-gcc
# make T=x86_64-default-linuxapp-gcc
..
Build complete

# modprobe uio (I think this is not useful)
# insmod build/kmod/rte_kni.ko (I think this is not useful)
# insmod build/kmod/igb_uio.ko (I think this is not useful)
# ./tools/pci_unbind.py --status

Network devices using IGB_UIO driver
====================================
<none>

Network devices using kernel driver
===================================
0000:00:19.0 '82579LM Gigabit Network Connection' 'Ethernet Connection I217-LM' if=eth1 drv=e1000e unused=<none>
0000:01:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth6 drv=ixgbe unused=igb_uio *Active*
0000:01:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth7 drv=ixgbe unused=igb_uio
0000:04:00.0 '82571EB Gigabit Ethernet Controller' if=eth2 drv=e1000e unused=igb_uio *Active*
0000:04:00.1 '82571EB Gigabit Ethernet Controller' if=eth3 drv=e1000e unused=igb_uio
0000:05:00.0 '82571EB Gigabit Ethernet Controller' if=eth4 drv=e1000e unused=igb_uio
0000:05:00.1 '82571EB Gigabit Ethernet Controller' if=eth5 drv=e1000e unused=igb_uio
0000:06:00.0 'RTL8111/8168B 'RTL8111/8168/8411 PCI Express Gigabit Ethernet controller' Controller' if=eth0 drv=r8169 unused=<none> *Active*



Other network devices
=====================
<none>
</pre>

test sur eth7:

<pre>
# ip link set eth7 eth1 down
# lspci|grep -i 'Ethernet.*Intel'
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 05)
# ./tools/pci_unbind.py --bind=igb_uio 0000:01:00.1 --bind=e1000e 00:19.0
</pre>

h3. Prepare examples programs:

<pre>
# export RTE_SDK=/root/sileht/dpdk-1.6.0r1
# export RTE_TARGET=build
# cd /root/sileht/
# cp -r $RTE_SDK/examples/helloworld my_rte_app
# cd my_rte_app
# make
</pre>

h3. Tests

<pre>
</pre>