FTOS » Historique » Version 30
« Précédent -
Version 30/31
(diff) -
Suivant » -
Version actuelle
Laurent GUERBY, 17/03/2018 09:51
FTOS¶
Dell/Force10 S4810 48 ports 10G SFP+ + 4 ports 40G
supporte cumulus http://cumulusnetworks.com/static/cumulus/pdf/Cumulus_Networks_Dell_Datasheet.pdf
http://cumulusnetworks.com/
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_CONFIG_8.3.12.0_29-Aug-2012.pdf
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_CLI_8.3.12.0_28-Aug-2012.pdf
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_9.5(0.0)_Config.pdf
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S6000_9.5(0.0)_CLI.pdf
Commandes¶
Version¶
s4810a#show version Dell Force10 Real Time Operating System Software Dell Force10 Operating System Version: 1.0 Dell Force10 Application Software Version: 8.3.12.1 Copyright (c) 1999-2012 by Dell Inc. All Rights Reserved. Build Time: Sun Nov 18 11:05:15 2012 Build Path: /sites/sjc/work/build/buildSpaces/build20/E8-3-12/SW/SRC/Cp_src/Tacacs s4810a uptime is 2 year(s), 5 week(s), 6 day(s), 0 hour(s), 54 minute(s) System image file is "system://A" System Type: S4810 Control Processor: Freescale QorIQ P2020 with 2147483648 bytes of memory. 128M bytes of boot flash memory. 1 52-port GE/TE/FG (SE) 48 Ten GigabitEthernet/IEEE 802.3 interface(s) 4 Forty GigabitEthernet/IEEE 802.3 interface(s)
s4810b>show version Dell Real Time Operating System Software Dell Operating System Version: 2.0 Dell Application Software Version: 9.5(0.0P2) Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved. Build Time: Thu Jul 3 15:45:57 2014 Build Path: /sites/eqx/work/swbuild01_1/build04/E9-5-0/SW/SRC Dell Networking OS uptime is 3 day(s), 18 hour(s), 41 minute(s) System image file is "system://A" System Type: S4810 Control Processor: Freescale QorIQ P2020 with 2 Gbytes (2147483648 bytes) of memory, cores(s) 1. 128M bytes of boot flash memory. 1 52-port GE/TE/FG (SE) 48 Ten GigabitEthernet/IEEE 802.3 interface(s) 4 Forty GigabitEthernet/IEEE 802.3 interface(s)
Screen¶
screen -m -c /dev/null /dev/ttyUSB0 9600 8n1
SSH¶
#conf t #ip ssh rsa-authentication enable
Setup¶
dir delete flash://startup-config reload no yes en exec stop jumpstart wr username force10 password force10 enable password force10 wr
portmod hybrid switchport int vl 2 unttagged t0/23 int vl 3 tagged t0/23 show vlan stack-unit 1 renumber 0 no yes ip ssh server enable
NTP¶
NTP client de nagios
conf t ntp server 192.168.3.7 ntp source Vlan 3175
Misc¶
show inventory media
show mac-address-table dynamic show mac-address-table dynamic vlan 3132 show mac-address-table dyn int te0/0
Force10# sh int swi te0/0
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
Name: TenGigabitEthernet 0/0
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
U 1
T 3133-3135,3175
Native VlanId: 1.
show interface tengigabitethernet 0/47 transceiver ... SFP+ 47 Temperature = 41.902C SFP+ 47 Voltage = 3.287V SFP+ 47 Tx Bias Current = 34.012mA SFP+ 47 Tx Power = 0.519mW SFP+ 47 Rx Power = 0.451mW
FTOS#sh int status Port Description Status Speed Duplex Vlan Te 0/0 Down Auto Auto 1,3131,3175,3199 Te 0/1 Up 10000 Mbit Full 1,20,128,666,3118,3131,3175,3199 Te 0/2 Up 10000 Mbit Full 3188 Te 0/3 Down Auto Auto 3188 Te 0/4 Up 10000 Mbit Full 3188 Te 0/5 Up 10000 Mbit Full 3188 Te 0/6 Down Auto Auto 3188 Te 0/7 Up 10000 Mbit Full 3188 Te 0/8 Up 10000 Mbit Full 3188 Te 0/9 Up 10000 Mbit Full 3188 Te 0/10 Down Auto Auto 3188 Te 0/11 Down Auto Auto 3188 Te 0/12 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/13 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/14 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/15 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/16 Down Auto Auto 1,3131-3132,3175,3199 Te 0/17 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/18 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/19 Down Auto Auto 1,3131-3132,3175,3199 Te 0/20 Up 10000 Mbit Full 1,3131-3132,3175,3199 Te 0/21 Up 10000 Mbit Full 1,3131-3132,3175,3199 ...
FTOS#sh interfaces switchport tengigabitethernet 0
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
Name: TenGigabitEthernet 0/0
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
U 1
T 3131,3175,3199
Native VlanId: 1.
Name: TenGigabitEthernet 0/1
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
U 1
T 20,128,666,3118,3131,3175,3199
Native VlanId: 1.
Name: TenGigabitEthernet 0/2
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
U 3188
Native VlanId: 3188.
...
FTOS#sh interfaces tengigabitethernet 0
TenGigabitEthernet 0/0 is up, line protocol is down
Hardware is DellForce10Eth, address is 00:01:e8:8b:4f:cf
Current address is 00:01:e8:8b:4f:cf
Pluggable media not present
Interface index is 33883138
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 80w0d1h
Queueing strategy: fifo
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
0 packets, 0 bytes, 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Time since last interface status change: 80w0d1h
TenGigabitEthernet 0/1 is up, line protocol is up
Hardware is DellForce10Eth, address is 00:01:e8:8b:4f:cf
Current address is 00:01:e8:8b:4f:cf
Pluggable media present, SFP+ type is 10GBASE-CU5M
Medium is Twinax Copper
Interface index is 34145282
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 10000 Mbit
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 80w0d1h
Queueing strategy: fifo
Input Statistics:
77846344701 packets, 33998273797981 bytes
4710063270 64-byte pkts, 40824319413 over 64-byte pkts, 9871182555 over 127-byte pkts
3982474520 over 255-byte pkts, 684219485 over 511-byte pkts, 17774085458 over 1023-byte pkts
64436920 Multicasts, 108058987 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
100565862739 packets, 85221880135780 bytes, 0 underruns
5520274128 64-byte pkts, 32394947465 over 64-byte pkts, 5238057644 over 127-byte pkts
2670375206 over 255-byte pkts, 2001008247 over 511-byte pkts, 52741200049 over 1023-byte pkts
300101222 Multicasts, 601777166 Broadcasts, 99663984351 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
Input 00.00 Mbits/sec, 217 packets/sec, 0.00% of line-rate
Output 00.00 Mbits/sec, 237 packets/sec, 0.01% of line-rate
Time since last interface status change: 1w5d1h
...
Switch Openstack¶
On se logue
enable password force10 conf
Preparation des ports
int range tengigabitethernet 0/0 - 47 no switchport portmod hybrid switchport no shut int range fortyGigE 0/48 - 60 no switchport portmod hybrid switchport no shut # Pour le port uplink int range tengigabitethernet 0/1 speed 1000
Pour un seul port :
enable conf int t0/10 speed 1000 exit exit wr # ou do wr
Au cas ou "no negotiation auto" peut aider (cas des SFP bidi alturna CISCO) :
FTOS(conf-if-te-0/16)#negotiation ? auto Perform link autonegotiation FTOS(conf-if-te-0/16)#speed ? 10 10 Mbps 100 100 Mbps 1000 1000 Mbps 10000 10000 Mbps auto Auto negotiation (default)
Creation des vlans
int vlan 3131 no shut int vlan 3175 ip address 192.168.3.48/24 no shut int vlan 3195 no shut int vlan 174 no shut
Ajout des ports au vlan
int vlan 3131 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9 int vlan 3132 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9 int vlan 3175 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9 int vlan 3199 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9
Pour le TouIX untagged 4031
FTOS>enable FTOS#conf FTOS(conf)#int vlan 4031 FTOS(conf-if-vl-4031)#no shut FTOS(conf-if-vl-4031)#description TouIX FTOS(conf-if-vl-4031)#untagged tengigabitethernet 0/35 FTOS(conf-if-vl-4031)#exit FTOS(conf)#wr
Detruire un vlan
no int vlan2
Enlever un port d'un vlan
int vlan 2 no tagged tengigabitethernet 0/1
Configuration routage
ip route 0.0.0.0/0 192.168.3.47
Configuration du logging
logging 91.224.149.152
Fabrication port bonding
- enable - conf - int tengigabitethernet 0/46 - port-channel-protocol lacp - port-channel 10 mode active - no shut - int tengigabitethernet 0/47 - port-channel-protocol lacp - port-channel 10 mode active - no shut - exit - int port-channel 10 - sw - no shut - end - wr
tcpdump
FTOS#tcpdump cp packet-count 10 % Copy operation not allowed until the TCP dump completes % FTOS#dir flash:/TCP_DUMP_DIR/Tcpdump_141014021344/
40G¶
40G to 4x10G : reboot necessaire