FTOS » Historique » Version 4
« Précédent -
Version 4/31
(diff) -
Suivant » -
Version actuelle
Mehdi Abaakouk, 16/09/2014 15:23
FTOS¶
Dell/Force10 S4810 48 ports 10G SFP+ + 4 ports 40G
supporte cumulus http://cumulusnetworks.com/static/cumulus/pdf/Cumulus_Networks_Dell_Datasheet.pdf
http://cumulusnetworks.com/
Commandes¶
screen -m -c /dev/null /dev/ttyUSB0 9600 8n1
dir
delete flash://startup-config
reload
no
yes
en exec
stop jumpstart
wr
username force10 password force10
enable password force10
wr
portmod hybrid
switchport
int vl 2
unttagged t0/23
int vl 3
tagged t0/23
show vlan
stack-unit 1 renumber 0
no
yes
show inventory media
ip ssh server enable
Switch Openstack¶
On se logue
enable password force10 conf
Preparation des ports
int range tengigabitethernet 0/0 - 46 no switchport portmod hybrid switchport no shut
Creation des vlans
int vlan 3131 no shut int vlan 3175 ip address 192.168.3.48/24 no shut int vlan 3195 no shut int vlan 174 no shut
Ajout des ports au vlan
int vlan 3131 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9 int vlan 3175 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9 int vlan 3199 tagged tengigabitethernet 0/1 tagged tengigabitethernet 0/5 tagged tengigabitethernet 0/7 tagged tengigabitethernet 0/9