Projet

Général

Profil

Mikrotik » Historique » Version 128

Laurent GUERBY, 30/07/2014 09:00

1 39 Laurent GUERBY
{{>toc}}
2 39 Laurent GUERBY
3 1 Laurent GUERBY
h1. Mikrotik
4 1 Laurent GUERBY
5 1 Laurent GUERBY
RouterOS
6 1 Laurent GUERBY
7 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/MikroTik_RouterOS
8 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:TOC
9 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Webfig
10 1 Laurent GUERBY
11 5 Laurent GUERBY
http://www.mikrotik.com/download.html
12 5 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
13 5 Laurent GUERBY
14 27 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Supported_Hardware
15 33 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Password_reset
16 34 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:PoE-Out
17 27 Laurent GUERBY
18 15 Laurent GUERBY
h2. Boitiers
19 15 Laurent GUERBY
20 16 Laurent GUERBY
* Nice box : http://forum.mikrotik.com/viewtopic.php?p=297825#p297825
21 21 Laurent GUERBY
* http://www.mikrotik.com/mfm
22 21 Laurent GUERBY
* http://www.aerial.net/shop/product_info.php?products_id=1085
23 21 Laurent GUERBY
* http://www.stationbox.info/
24 21 Laurent GUERBY
25 45 Laurent GUERBY
* Boîtiers Rexel très chers
26 23 Julien Aubé
* http://www.technic-achat.com/coffret-electrique-ip66-imo,fr,4,144T_XX.cfm (144T0010)
27 23 Julien Aubé
* http://www.interprojekt.com.pl/gold-alubox-outdoor-waterproof-case-p-472.html
28 23 Julien Aubé
* http://www.materielelectrique.com/coffret-polyester-marina-ip66-ik10-7035-300x220x160-p-6579.html
29 23 Julien Aubé
30 15 Laurent GUERBY
31 20 Laurent GUERBY
h2. Montage
32 20 Laurent GUERBY
33 20 Laurent GUERBY
* http://shop.varia-store.com/product_info.php?info=p1390_RF-Elements-EasyBracket---EasyBracket-Universal.html
34 20 Laurent GUERBY
35 19 Laurent GUERBY
h2. PoE
36 19 Laurent GUERBY
37 19 Laurent GUERBY
* http://www.i4wifi.eu/en/EU-230V-powering/PoE-convertor-48-V-24-V-802-3af-at.html
38 19 Laurent GUERBY
39 32 Laurent GUERBY
h2. Password
40 32 Laurent GUERBY
41 32 Laurent GUERBY
From: 	Le Net du Kermeur
42 45 Laurent GUERBY
Utilitaire mtpass, ça se trouve là : http://manio.skyboo.net/mikrotik/
43 32 Laurent GUERBY
Ca se compile sous g++, donc sur n'importe quel Linux ou *BSD.
44 45 Laurent GUERBY
Testé sous OpenBSD, il fait le boulot.
45 32 Laurent GUERBY
46 40 Laurent GUERBY
h2. RB433L and RB433UAHL
47 40 Laurent GUERBY
48 40 Laurent GUERBY
h3. NPK
49 40 Laurent GUERBY
50 40 Laurent GUERBY
http://routing.explode.gr/node/96
51 40 Laurent GUERBY
https://forum.openwrt.org/viewtopic.php?id=32320&p=3
52 40 Laurent GUERBY
https://forum.openwrt.org/viewtopic.php?pid=165526#p165526
53 40 Laurent GUERBY
https://github.com/lqez/npk
54 40 Laurent GUERBY
Easy install of OpenWrt on MikroTik's devices https://forum.openwrt.org/viewtopic.php?id=39171
55 40 Laurent GUERBY
http://wp.ayufan.eu/2013/02/the-rb951g-and-openwrt/
56 40 Laurent GUERBY
57 40 Laurent GUERBY
h3. Misc
58 40 Laurent GUERBY
59 40 Laurent GUERBY
TODO
60 40 Laurent GUERBY
http://i.mt.lv/routerboard/files/rb433L-series-qg_1377089307.pdf
61 40 Laurent GUERBY
62 44 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?t=65977&p=336057
63 44 Laurent GUERBY
RF antenna and close miniPCI ?
64 44 Laurent GUERBY
65 41 Laurent GUERBY
h3. Power Consuption
66 41 Laurent GUERBY
67 41 Laurent GUERBY
<pre>
68 41 Laurent GUERBY
eth1 = PoE        192.168.88.101/24
69 41 Laurent GUERBY
eth2 = milieu     192.168.102.1/24
70 41 Laurent GUERBY
eth3 = oppose PoE 192.168.103.1/24
71 41 Laurent GUERBY
wlan1 = minipci du bas 172.31.31.43/24
72 41 Laurent GUERBY
73 41 Laurent GUERBY
http://dslrouter.sourceforge.net/stuff/mikrotik/mikrotik/AirMax5_and_Mikrotik_Router_Board_Connection_Guide_revised.pdf
74 41 Laurent GUERBY
75 41 Laurent GUERBY
netboot 
76 41 Laurent GUERBY
rb750up http://forum.mikrotik.com/viewtopic.php?f=3&t=57943&start=50
77 41 Laurent GUERBY
78 41 Laurent GUERBY
USB RB750UP http://patchwork.openwrt.org/patch/3252/
79 41 Laurent GUERBY
80 41 Laurent GUERBY
http://wiki.openwrt.org/toh/mikrotik/rb750
81 41 Laurent GUERBY
http://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/
82 41 Laurent GUERBY
83 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Netinstall
84 41 Laurent GUERBY
http://routerboard.com/pricelist/download_file.php?file_id=118
85 41 Laurent GUERBY
86 41 Laurent GUERBY
http://www.gowifi.co.nz/userguides/perform-a-netinstall.pdf
87 41 Laurent GUERBY
88 41 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=2&t=66093
89 41 Laurent GUERBY
reset longer than 20 seconds
90 41 Laurent GUERBY
91 41 Laurent GUERBY
https://forum.openwrt.org/viewtopic.php?id=41490
92 41 Laurent GUERBY
93 41 Laurent GUERBY
RB433L
94 41 Laurent GUERBY
idle 108 mA 12V 
95 41 Laurent GUERBY
+1 eth 130mA 173 mA max au boot
96 41 Laurent GUERBY
97 45 Laurent GUERBY
RB433L + ethernet branché RouterOS 5.11
98 41 Laurent GUERBY
conso identique RouterOS 5.26
99 41 Laurent GUERBY
RouterOS 6.6 ?
100 41 Laurent GUERBY
Volt    mA  mW
101 41 Laurent GUERBY
(*  5.0 259)1295.0
102 41 Laurent GUERBY
(*  6.0 227)1362.0
103 41 Laurent GUERBY
(*  7.0 200)1400.0
104 41 Laurent GUERBY
(*  8.0 180)1440.0
105 41 Laurent GUERBY
(*  8.5 175)1487.5
106 41 Laurent GUERBY
(*  9.0 165)1485.0
107 41 Laurent GUERBY
(*  9.5 160)1520.0
108 41 Laurent GUERBY
(* 10.0 152)1520.0
109 41 Laurent GUERBY
(* 11.0 142)1562.0
110 41 Laurent GUERBY
(* 11.5 138)1587.0
111 41 Laurent GUERBY
(* 12.0 132)1584.0 152 pendant file upload  firmware (* 12.0 152)1824.0
112 41 Laurent GUERBY
(* 12.5 129)1612.5
113 41 Laurent GUERBY
(* 13.0 125)1625.0
114 41 Laurent GUERBY
(* 14.0 119)1666.0
115 41 Laurent GUERBY
(* 15.0 112)1680.0
116 41 Laurent GUERBY
(* 18.0  99)1782.0
117 41 Laurent GUERBY
(* 21.0  90)1890.0
118 41 Laurent GUERBY
(* 24.0  83)1992.0
119 41 Laurent GUERBY
(* 26.0  79)2054.0
120 41 Laurent GUERBY
(* 27.0  77)2079.0
121 41 Laurent GUERBY
122 41 Laurent GUERBY
RB433L sans ethernet
123 41 Laurent GUERBY
   V    mA  mW
124 41 Laurent GUERBY
4.0 off
125 41 Laurent GUERBY
(*  5.0 206)1030.0
126 41 Laurent GUERBY
(*  6.0 181)1086.0
127 41 Laurent GUERBY
(*  7.0 162)1134.0
128 41 Laurent GUERBY
(*  8.0 146)1168.0
129 41 Laurent GUERBY
(*  9.0 133)1197.0
130 41 Laurent GUERBY
(* 10.0 124)1240.0
131 41 Laurent GUERBY
(* 11.0 116)1276.0
132 41 Laurent GUERBY
(* 12.0 110)1320.0
133 41 Laurent GUERBY
(* 13.0 104)1352.0
134 41 Laurent GUERBY
(* 14.0  99)1386.0
135 41 Laurent GUERBY
(* 15.0  94)1410.0
136 41 Laurent GUERBY
137 41 Laurent GUERBY
diff ethernet pas ethernet constant en watt sur la plage de 265 mW a 260 mW
138 41 Laurent GUERBY
139 41 Laurent GUERBY
eth+ R52n-M  5180 AP-bridge 17dBm = 50 mW
140 41 Laurent GUERBY
(* 12.0 165)1980.0
141 41 Laurent GUERBY
vs (* 12.0 132)1584.0
142 41 Laurent GUERBY
143 41 Laurent GUERBY
0 dBm = 1 mW ou 7 dBm
144 41 Laurent GUERBY
conso inchangee
145 41 Laurent GUERBY
(* 12.0 163)1956.0
146 41 Laurent GUERBY
163-166
147 41 Laurent GUERBY
148 41 Laurent GUERBY
tout en bridge cote RB433L 7 dBm = 5 mW avec iperf 100M UDP
149 41 Laurent GUERBY
175-180
150 41 Laurent GUERBY
(* 12.0 (- 180 163))204.0 mW
151 41 Laurent GUERBY
152 41 Laurent GUERBY
serial http://forum.mikrotik.com/viewtopic.php?f=3&t=76194
153 41 Laurent GUERBY
http://wiki.openwrt.org/toh/mikrotik/rb433
154 41 Laurent GUERBY
155 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Password_reset
156 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/MikroTik_Password_Recovery
157 41 Laurent GUERBY
158 41 Laurent GUERBY
http://wireless.kernel.org/en/users/Drivers/ath9k/devices
159 41 Laurent GUERBY
WLM200NX dual band
160 41 Laurent GUERBY
http://wireless.kernel.org/en/users/Drivers/ath5k
161 41 Laurent GUERBY
162 41 Laurent GUERBY
R52n-M
163 41 Laurent GUERBY
R52Hn
164 41 Laurent GUERBY
165 41 Laurent GUERBY
http://download2.mikrotik.com/routeros/5.26/routeros-mipsbe-5.26.npk
166 41 Laurent GUERBY
http://download2.mikrotik.com/routeros/6.6/routeros-mipsbe-6.6.npk
167 41 Laurent GUERBY
168 41 Laurent GUERBY
169 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Netinstall
170 41 Laurent GUERBY
171 1 Laurent GUERBY
</pre>
172 1 Laurent GUERBY
173 1 Laurent GUERBY
!conso-rb433l.png!
174 1 Laurent GUERBY
175 46 Laurent GUERBY
h2. RB433 and RB433UAH and RB435G
176 46 Laurent GUERBY
177 46 Laurent GUERBY
h3. Links
178 46 Laurent GUERBY
179 46 Laurent GUERBY
http://routerboard.com/RB433
180 46 Laurent GUERBY
http://routerboard.com/RB433UAH
181 46 Laurent GUERBY
http://routerboard.com/RB435G
182 46 Laurent GUERBY
183 46 Laurent GUERBY
http://wiki.openwrt.org/toh/mikrotik/rb435
184 46 Laurent GUERBY
http://wiki.openwrt.org/toh/mikrotik/rb433
185 46 Laurent GUERBY
186 46 Laurent GUERBY
h3. Power Consumption
187 46 Laurent GUERBY
188 45 Laurent GUERBY
<pre>
189 45 Laurent GUERBY
RB433 MikroTik RouterOS 5.24
190 45 Laurent GUERBY
191 45 Laurent GUERBY
V    mA avec 1 eth
192 45 Laurent GUERBY
24.0 123 (* 24 0.123)2.952  (112 sans eth diff 0.264W)
193 45 Laurent GUERBY
16.0 149 (* 16 0.149)2.384
194 45 Laurent GUERBY
13.9 162 (* 13.9 0.162)2.2518  (142 sans eth diff 0.278W)
195 45 Laurent GUERBY
12.0 178 (* 12.0 0.178)2.136
196 45 Laurent GUERBY
10.0     207 (* 10.0 0.207)2.07
197 45 Laurent GUERBY
 8.0     250 (*  8.0 0.250)2.0
198 45 Laurent GUERBY
199 45 Laurent GUERBY
en dessous de 8 V : coupure
200 45 Laurent GUERBY
201 45 Laurent GUERBY
RB433UAH MikroTik RouterOS 5.24
202 45 Laurent GUERBY
avec 1 eth
203 45 Laurent GUERBY
24.0 189 (* 24 0.189)4.536
204 45 Laurent GUERBY
12.0 249 (* 12 0.249)2.988
205 45 Laurent GUERBY
 8.0 366 (* 8  0.327)2.616 292 sans eth
206 45 Laurent GUERBY
207 45 Laurent GUERBY
208 45 Laurent GUERBY
RB435G MikroTik RouterOS 5.24
209 45 Laurent GUERBY
210 45 Laurent GUERBY
avec 1 eth
211 45 Laurent GUERBY
212 45 Laurent GUERBY
24.0 117 (* 24.0 0.117)2.808 112 sans eth (* 0.005 24)0.12
213 45 Laurent GUERBY
12.0 187 (* 12.0 0.187)2.244
214 45 Laurent GUERBY
10.0 216 (* 10.0 0.216)2.16
215 45 Laurent GUERBY
 8.0 261 (*  8.0 0.261)2.088 255 sans eth (* 0.006 8.0)0.048
216 45 Laurent GUERBY
 7.0 303 (*  7.0 0.303)2.121
217 45 Laurent GUERBY
218 45 Laurent GUERBY
8.0
219 45 Laurent GUERBY
[admin@MikroTik] > system health print
220 45 Laurent GUERBY
     fan-mode: auto
221 45 Laurent GUERBY
      use-fan: main
222 45 Laurent GUERBY
   active-fan: none
223 45 Laurent GUERBY
      current: 172mA
224 45 Laurent GUERBY
  temperature: 20C
225 45 Laurent GUERBY
226 45 Laurent GUERBY
12.0
227 45 Laurent GUERBY
[admin@MikroTik] > system health print
228 45 Laurent GUERBY
           fan-mode: auto
229 45 Laurent GUERBY
            use-fan: main
230 45 Laurent GUERBY
         active-fan: none
231 45 Laurent GUERBY
            voltage: 11.3V
232 45 Laurent GUERBY
            current: 108mA => 192
233 45 Laurent GUERBY
        temperature: 20C
234 45 Laurent GUERBY
  power-consumption: 1.2W
235 45 Laurent GUERBY
236 45 Laurent GUERBY
24.0
237 45 Laurent GUERBY
[admin@MikroTik] > system health print
238 45 Laurent GUERBY
           fan-mode: auto
239 45 Laurent GUERBY
            use-fan: main
240 45 Laurent GUERBY
         active-fan: none
241 45 Laurent GUERBY
            voltage: 24V
242 45 Laurent GUERBY
            current: 50mA => 119
243 45 Laurent GUERBY
        temperature: 20C
244 45 Laurent GUERBY
  power-consumption: 1.2W
245 45 Laurent GUERBY
246 45 Laurent GUERBY
</pre>
247 45 Laurent GUERBY
248 1 Laurent GUERBY
h2. RB750UP
249 1 Laurent GUERBY
250 1 Laurent GUERBY
http://routerboard.com/RB750UP
251 2 Laurent GUERBY
252 25 Laurent GUERBY
http://blog.lekermeur.net/wp-content/uploads/2012/03/Printemps2012_RB750.pdf
253 16 Laurent GUERBY
254 45 Laurent GUERBY
Attention : problèmes lors que le RB750UP est alimenté en PoE : http://forum.mikrotik.com/viewtopic.php?f=3&t=57943
255 26 Laurent GUERBY
> we are working on new FW that would add useful features that are currently missing. One of them is reworked power management.
256 26 Laurent GUERBY
257 12 Laurent GUERBY
Voltage : http://forum.mikrotik.com/viewtopic.php?f=3&t=58124
258 13 Laurent GUERBY
> limit on power out port is 500mA regardless of output voltage. so at 12V you will be able to power only MAX 6W device. while at 30V 15W.
259 13 Laurent GUERBY
> If you power RB570UP with PoE 24V adapter over 100m cable, then resulting output voltage at full load (all 4 ports giving out 500mA totaling to 2A) then voltage to powered ports at RB750UP end will be around 21V then losses on cable and protections you end up with around 19V at the end device. and cables stretching for 200m from PSU brick.
260 13 Laurent GUERBY
> PoE in port has no input limitation only output is limited to 500mA and with 4 prots it is 2A
261 12 Laurent GUERBY
262 1 Laurent GUERBY
Upgrade to 5.20
263 120 Laurent GUERBY
264 120 Laurent GUERBY
<pre>
265 120 Laurent GUERBY
/ip arp print
266 120 Laurent GUERBY
# print MAC IP
267 120 Laurent GUERBY
268 120 Laurent GUERBY
/interface bridge host print
269 120 Laurent GUERBY
# print MAC
270 120 Laurent GUERBY
271 120 Laurent GUERBY
/interface ethernet switch host print
272 120 Laurent GUERBY
# print MAC-port table
273 120 Laurent GUERBY
274 120 Laurent GUERBY
/interface ethernet set ether5 poe-out=forced-on
275 120 Laurent GUERBY
# force PoE
276 121 Laurent GUERBY
277 121 Laurent GUERBY
/interface ethernet poe set ether2-master-local poe-priority=5
278 121 Laurent GUERBY
# lower number = highest priority
279 121 Laurent GUERBY
280 121 Laurent GUERBY
/interface ethernet poe pr   
281 121 Laurent GUERBY
# print prio settings
282 121 Laurent GUERBY
283 121 Laurent GUERBY
/interface ethernet poe monitor [find]
284 121 Laurent GUERBY
# monitor watt and voltage
285 128 Laurent GUERBY
286 128 Laurent GUERBY
system identity set name=totoRB750UP
287 120 Laurent GUERBY
</pre>
288 35 Laurent GUERBY
289 35 Laurent GUERBY
<pre>
290 35 Laurent GUERBY
291 35 Laurent GUERBY
[admin@MikroTik] /interface ethernet poe settings> upgrade
292 35 Laurent GUERBY
Do you really want to upgrade PoE firmware? [y/n] 
293 35 Laurent GUERBY
y
294 35 Laurent GUERBY
Please reboot to finish PoE firmware upgrade.
295 35 Laurent GUERBY
296 35 Laurent GUERBY
[admin@MikroTik] /interface ethernet poe settings> pr
297 35 Laurent GUERBY
                   version: 2.0
298 35 Laurent GUERBY
  ether1-poe-in-long-cable: no
299 35 Laurent GUERBY
300 35 Laurent GUERBY
[admin@MikroTik] /interface ethernet poe> monitor [find]
301 35 Laurent GUERBY
               name: ether2-master-local ether3-slave-local ether4-slave-local ether5-slave-local
302 12 Laurent GUERBY
    poe-out-voltage:                                                           23.5V
303 7 Laurent GUERBY
    poe-out-current:                                                           160mA
304 7 Laurent GUERBY
      poe-out-power:                                                           3.7W
305 7 Laurent GUERBY
</pre>
306 7 Laurent GUERBY
307 7 Laurent GUERBY
308 7 Laurent GUERBY
309 8 Laurent GUERBY
* http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS
310 7 Laurent GUERBY
* To update firmware (latest RouterOS 5.12):
311 7 Laurent GUERBY
* Files / upload choose file : routeros-mipsbe-5.12.npk (12MB)
312 1 Laurent GUERBY
* Attendre la fin de upload
313 1 Laurent GUERBY
* System / Packages / IPv6 schedule for update
314 1 Laurent GUERBY
* System / Reboot
315 1 Laurent GUERBY
* about 90 seconds. Note: PoE will be cut during the reboot
316 1 Laurent GUERBY
317 3 Jérôme Nicolle
chiwa admin VLAN 3175
318 3 Jérôme Nicolle
192.168.3.20
319 3 Jérôme Nicolle
320 3 Jérôme Nicolle
telnet login admin pass (vide)
321 3 Jérôme Nicolle
web
322 3 Jérôme Nicolle
323 3 Jérôme Nicolle
324 3 Jérôme Nicolle
<pre>
325 3 Jérôme Nicolle
[admin@rb750up-chiwawa] > interface ethernet print                                                                 
326 3 Jérôme Nicolle
Flags: X - disabled, R - running, S - slave 
327 3 Jérôme Nicolle
 #    NAME                               MTU MAC-ADDRESS       ARP        MASTER-PORT                            SWITCH                           
328 3 Jérôme Nicolle
 0    ether1-gateway                    1500 00:0C:42:E9:BA:8A enabled   
329 3 Jérôme Nicolle
 1 R  ;;; To chiwa's router *** NO POE ***
330 3 Jérôme Nicolle
      ether2-master-local               1500 00:0C:42:E9:BA:8B enabled    none                                   switch1                          
331 3 Jérôme Nicolle
 2 RS ;;; to Vince' NS5M -  To Myrys
332 3 Jérôme Nicolle
      ether3-slave-local                1500 00:0C:42:E9:BA:8C enabled    ether2-master-local                    switch1                          
333 28 Laurent GUERBY
 3 RS ;;; to NS5M east - To CDRX
334 28 Laurent GUERBY
      ether4-slave-local                1500 00:0C:42:E9:BA:8D enabled    ether2-master-local                    switch1                          
335 28 Laurent GUERBY
 4 RS ;;; to beaconing NS5M (port balcon.3)
336 28 Laurent GUERBY
      ether5-slave-local                1500 00:0C:42:E9:BA:8E enabled    ether2-master-local                    switch1         
337 28 Laurent GUERBY
</pre>
338 28 Laurent GUERBY
339 28 Laurent GUERBY
RouterOS v2
340 28 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:PoE-Out#RouterOS_2   
341 28 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:PoE-Out#Changes_between_1.x_and_2.0_PoE-Out_controller_firmware
342 28 Laurent GUERBY
<pre>
343 28 Laurent GUERBY
[admin@MikroTik] > interface ethernet poe monitor [find]
344 11 Laurent GUERBY
              name: ether2 ether3 ether4 ether5
345 3 Jérôme Nicolle
   poe-out-voltage: 23.2V  23.2V  23.2V  
346 11 Laurent GUERBY
   poe-out-current: 224mA  116mA  64mA   
347 2 Laurent GUERBY
     poe-out-power: 5.1W   2.6W   1.4W 
348 11 Laurent GUERBY
</pre>
349 1 Laurent GUERBY
350 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/PoE-Out
351 1 Laurent GUERBY
352 1 Laurent GUERBY
/interface ethernet set ether2 poe-out=on
353 1 Laurent GUERBY
/interface ethernet set ether2 poe-out=off
354 1 Laurent GUERBY
/interface ethernet set ether2 poe-out=auto
355 11 Laurent GUERBY
356 11 Laurent GUERBY
Note:
357 45 Laurent GUERBY
<obinou> Le poe-out, il faut le mettre à "on" , et pas à "auto".
358 45 Laurent GUERBY
<obinou> sans ça, j'ai l'impression que le RB fait un power-cycle si il détecte une perte de link
359 45 Laurent GUERBY
<obinou> or, quand la NSM5 démarre, entre le bootloader & le firmware ca perd le link
360 22 Julien Aubé
<obinou> conclusion: reboot en boucle.
361 22 Julien Aubé
362 22 Julien Aubé
Note:
363 45 Laurent GUERBY
Après essais il est préférable d'éviter le 12V: Si au départ ça semble marcher, les pics de courants
364 45 Laurent GUERBY
dépassent parfois la limite autorisé par port de 500mA, et le port se coupe immédiatement.
365 45 Laurent GUERBY
Le 24V n'a pas montré ce souci.
366 24 Julien Aubé
367 2 Laurent GUERBY
Note 2: 
368 4 Laurent GUERBY
Dans les derniers firmwares Microtik, l'option "poe-out" prend comme option "auto", "forced-on", ou "forced-off".
369 1 Laurent GUERBY
370 6 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=3&t=49976&sid=40ea9661791968a896ab35214dc18f15&start=50
371 1 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=3&t=57608
372 6 Laurent GUERBY
373 6 Laurent GUERBY
<pre>
374 1 Laurent GUERBY
[admin@MikroTik-Ouin] > /interface ethernet print detail            
375 6 Laurent GUERBY
Flags: X - disabled, R - running, S - slave 
376 10 Laurent GUERBY
 0 R  name="ether1-gateway" mtu=1500 l2mtu=1600 mac-address=00:0C:42:D3:94:D5 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps 
377 6 Laurent GUERBY
 1    name="ether2-master-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D6 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto 
378 6 Laurent GUERBY
 2    name="ether3-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D7 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto 
379 6 Laurent GUERBY
 3 R  name="ether4-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D8 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on 
380 29 Laurent GUERBY
 4 R  name="ether5-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D9 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on 
381 29 Laurent GUERBY
</pre>
382 29 Laurent GUERBY
383 29 Laurent GUERBY
<pre>
384 29 Laurent GUERBY
[admin@MikroTik-Ouin] > sys resource pr
385 29 Laurent GUERBY
                   uptime: 6m6s
386 29 Laurent GUERBY
                  version: 5.12
387 29 Laurent GUERBY
              free-memory: 17880KiB
388 29 Laurent GUERBY
             total-memory: 29708KiB
389 29 Laurent GUERBY
                      cpu: MIPS 24Kc V7.4
390 29 Laurent GUERBY
                cpu-count: 1
391 29 Laurent GUERBY
            cpu-frequency: 400MHz
392 29 Laurent GUERBY
                 cpu-load: 0%
393 29 Laurent GUERBY
           free-hdd-space: 30844KiB
394 29 Laurent GUERBY
          total-hdd-space: 61440KiB
395 29 Laurent GUERBY
  write-sect-since-reboot: 214
396 29 Laurent GUERBY
         write-sect-total: 96113
397 29 Laurent GUERBY
               bad-blocks: 0%
398 38 Laurent GUERBY
        architecture-name: mipsbe
399 38 Laurent GUERBY
               board-name: RB750UP
400 38 Laurent GUERBY
                 platform: MikroTik
401 38 Laurent GUERBY
</pre>
402 38 Laurent GUERBY
403 38 Laurent GUERBY
h3. NTP
404 39 Laurent GUERBY
405 39 Laurent GUERBY
<pre>
406 39 Laurent GUERBY
/system ntp client set primary-ntp=172.31.31.254 enabled=yes
407 39 Laurent GUERBY
</pre>
408 1 Laurent GUERBY
409 1 Laurent GUERBY
h3. rsyslog
410 39 Laurent GUERBY
411 39 Laurent GUERBY
http://randomtweaks.blogspot.fr/2013/03/mikrotik-remote-logging-using-ubuntu.html
412 43 Laurent GUERBY
413 39 Laurent GUERBY
<pre>
414 38 Laurent GUERBY
/system log action set 3 remote=172.31.31.252
415 17 Jérôme Nicolle
/system log add action=remote disabled=no
416 17 Jérôme Nicolle
</pre>
417 18 Jérôme Nicolle
418 122 Laurent GUERBY
h3. Bridging sur le 750UP
419 18 Jérôme Nicolle
420 45 Laurent GUERBY
Le RB750UP est conçu dans l'idée d'en faire un CPE multi-antennes. Par défaut, le port 1 (POE-in ou LAN) n'est pas bridgé sur le switch des 4 ports POE-out, on s'en sert plutôt en mode routé.
421 18 Jérôme Nicolle
422 45 Laurent GUERBY
Pour l'utiliser comme un simple switch et non comme un routeur il suffit de créer un bridge entre les interfaces :
423 17 Jérôme Nicolle
424 17 Jérôme Nicolle
<pre>
425 122 Laurent GUERBY
interface bridge add name=bridge1 
426 122 Laurent GUERBY
interface bridge port add bridge=bridge1 interface=ether1-gateway 
427 122 Laurent GUERBY
interface bridge port add bridge=bridge1 interface=ether2-master-local 
428 37 Laurent GUERBY
</pre>
429 37 Laurent GUERBY
430 127 Laurent GUERBY
<pre>
431 127 Laurent GUERBY
ip address print
432 127 Laurent GUERBY
ip address add address=172.31.31.24/24 interface=bridge1
433 127 Laurent GUERBY
434 127 Laurent GUERBY
ip address print
435 127 Laurent GUERBY
ip address remove 0
436 127 Laurent GUERBY
</pre>
437 127 Laurent GUERBY
438 123 Laurent GUERBY
h3. DHCP sur le 750UP
439 22 Julien Aubé
440 45 Laurent GUERBY
Note: Attention, un serveur DHCP est actif par défaut sur les ports 2 à 5. Il faut le désactiver
441 37 Laurent GUERBY
pour passer en mode switch.
442 37 Laurent GUERBY
443 37 Laurent GUERBY
<pre>
444 37 Laurent GUERBY
ip dhcp-server print
445 37 Laurent GUERBY
ip dhcp-server remove 0
446 125 Laurent GUERBY
447 125 Laurent GUERBY
ip dhcp-client print
448 125 Laurent GUERBY
ip dhcp-client remove 0
449 37 Laurent GUERBY
</pre>
450 37 Laurent GUERBY
451 124 Laurent GUERBY
h3. Routing sur le 750UP
452 37 Laurent GUERBY
453 37 Laurent GUERBY
<pre>
454 17 Jérôme Nicolle
ip route add dst-address=0.0.0.0/0 gateway=172.16.0.254
455 10 Laurent GUERBY
</pre>
456 1 Laurent GUERBY
457 1 Laurent GUERBY
458 126 Laurent GUERBY
h3. RB750UP en mode BOX pour les nanostation
459 1 Laurent GUERBY
460 1 Laurent GUERBY
Connection to the routerboard
461 36 Mehdi Abaakouk
462 36 Mehdi Abaakouk
<pre>
463 36 Mehdi Abaakouk
ssh admin@192.168.88.1
464 36 Mehdi Abaakouk
</pre>
465 36 Mehdi Abaakouk
466 36 Mehdi Abaakouk
Reset the RouterBoard :
467 36 Mehdi Abaakouk
<pre>
468 126 Laurent GUERBY
$ setup 
469 126 Laurent GUERBY
$ r
470 36 Mehdi Abaakouk
$ y
471 36 Mehdi Abaakouk
</pre>
472 1 Laurent GUERBY
473 1 Laurent GUERBY
Le routerboard reboot et on se reconnect
474 1 Laurent GUERBY
475 1 Laurent GUERBY
Configuration du WAN
476 1 Laurent GUERBY
477 1 Laurent GUERBY
<pre>
478 1 Laurent GUERBY
$ ip address add address=91.224.149.194/24 interface=ether1-gateway
479 36 Mehdi Abaakouk
$ ip route add gateway=91.224.149.254
480 36 Mehdi Abaakouk
$ ip address print 
481 36 Mehdi Abaakouk
$ ip route print 
482 36 Mehdi Abaakouk
</pre>
483 126 Laurent GUERBY
484 126 Laurent GUERBY
h2. RB250GS
485 126 Laurent GUERBY
486 126 Laurent GUERBY
VLAN http://wiki.mikrotik.com/wiki/SwOS/Router-On-A-Stick
487 126 Laurent GUERBY
Doc http://wiki.mikrotik.com/wiki/SwOS
488 126 Laurent GUERBY
vlan limitation mikrotik rb250gs http://forum.mikrotik.com/viewtopic.php?f=17&t=45721
489 126 Laurent GUERBY
Routeur, switch, VLAN et multi-modems (via rb250gs) http://doc.rhizome-fai.net/doku.php?id=technique:routeur:vlan