Projet

Général

Profil

Mikrotik » Historique » Version 16

Laurent GUERBY, 01/03/2012 12:00

1 1 Laurent GUERBY
h1. Mikrotik
2 1 Laurent GUERBY
3 1 Laurent GUERBY
RouterOS
4 1 Laurent GUERBY
5 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/MikroTik_RouterOS
6 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:TOC
7 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Webfig
8 1 Laurent GUERBY
9 5 Laurent GUERBY
http://www.mikrotik.com/download.html
10 5 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
11 5 Laurent GUERBY
12 15 Laurent GUERBY
h2. Boitiers
13 15 Laurent GUERBY
14 16 Laurent GUERBY
* Nice box : http://forum.mikrotik.com/viewtopic.php?p=297825#p297825
15 16 Laurent GUERBY
* TODO Ouin/obinou
16 15 Laurent GUERBY
17 1 Laurent GUERBY
h2. RB750UP
18 1 Laurent GUERBY
19 1 Laurent GUERBY
http://routerboard.com/RB750UP
20 2 Laurent GUERBY
21 16 Laurent GUERBY
22 9 Laurent GUERBY
23 12 Laurent GUERBY
Voltage : http://forum.mikrotik.com/viewtopic.php?f=3&t=58124
24 13 Laurent GUERBY
> limit on power out port is 500mA regardless of output voltage. so at 12V you will be able to power only MAX 6W device. while at 30V 15W.
25 13 Laurent GUERBY
> If you power RB570UP with PoE 24V adapter over 100m cable, then resulting output voltage at full load (all 4 ports giving out 500mA totaling to 2A) then voltage to powered ports at RB750UP end will be around 21V then losses on cable and protections you end up with around 19V at the end device. and cables stretching for 200m from PSU brick.
26 13 Laurent GUERBY
> PoE in port has no input limitation only output is limited to 500mA and with 4 prots it is 2A
27 12 Laurent GUERBY
28 12 Laurent GUERBY
29 7 Laurent GUERBY
* http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS
30 7 Laurent GUERBY
* To update firmware (latest RouterOS 5.12):
31 7 Laurent GUERBY
* Files / upload choose file : routeros-mipsbe-5.12.npk (12MB)
32 7 Laurent GUERBY
* Attendre la fin de upload
33 7 Laurent GUERBY
* System / Packages / IPv6 schedule for update
34 7 Laurent GUERBY
* System / Reboot
35 8 Laurent GUERBY
* about 90 seconds. Note: PoE will be cut during the reboot
36 7 Laurent GUERBY
37 7 Laurent GUERBY
chiwa admin VLAN 3175
38 1 Laurent GUERBY
192.168.3.20
39 1 Laurent GUERBY
40 1 Laurent GUERBY
telnet login admin pass (vide)
41 1 Laurent GUERBY
web
42 1 Laurent GUERBY
43 3 Jérôme Nicolle
44 3 Jérôme Nicolle
<pre>
45 3 Jérôme Nicolle
[admin@rb750up-chiwawa] > interface ethernet print                                                                 
46 3 Jérôme Nicolle
Flags: X - disabled, R - running, S - slave 
47 3 Jérôme Nicolle
 #    NAME                               MTU MAC-ADDRESS       ARP        MASTER-PORT                            SWITCH                           
48 3 Jérôme Nicolle
 0    ether1-gateway                    1500 00:0C:42:E9:BA:8A enabled   
49 3 Jérôme Nicolle
 1 R  ;;; To chiwa's router *** NO POE ***
50 3 Jérôme Nicolle
      ether2-master-local               1500 00:0C:42:E9:BA:8B enabled    none                                   switch1                          
51 3 Jérôme Nicolle
 2 RS ;;; to Vince' NS5M -  To Myrys
52 3 Jérôme Nicolle
      ether3-slave-local                1500 00:0C:42:E9:BA:8C enabled    ether2-master-local                    switch1                          
53 3 Jérôme Nicolle
 3 RS ;;; to NS5M east - To CDRX
54 3 Jérôme Nicolle
      ether4-slave-local                1500 00:0C:42:E9:BA:8D enabled    ether2-master-local                    switch1                          
55 3 Jérôme Nicolle
 4 RS ;;; to beaconing NS5M (port balcon.3)
56 3 Jérôme Nicolle
      ether5-slave-local                1500 00:0C:42:E9:BA:8E enabled    ether2-master-local                    switch1         
57 3 Jérôme Nicolle
</pre>
58 3 Jérôme Nicolle
59 11 Laurent GUERBY
http://wiki.mikrotik.com/wiki/PoE-Out
60 3 Jérôme Nicolle
61 11 Laurent GUERBY
/interface ethernet set ether2 poe-out=on
62 2 Laurent GUERBY
/interface ethernet set ether2 poe-out=off
63 2 Laurent GUERBY
/interface ethernet set ether2 poe-out=auto
64 11 Laurent GUERBY
65 11 Laurent GUERBY
Note:
66 11 Laurent GUERBY
<obinou> Le poe-out, il faut le mettre à "on" , et pas à "auto".
67 11 Laurent GUERBY
<obinou> sans ça, j'ai l'impression que le RB fait un power-cycle si il détecte une perte de link
68 11 Laurent GUERBY
<obinou> or, quand la NSM5 démarre, entre le bootloader & le firmware ca perd le link
69 11 Laurent GUERBY
<obinou> conclusion: reboot en boucle.
70 2 Laurent GUERBY
71 2 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=3&t=49976&sid=40ea9661791968a896ab35214dc18f15&start=50
72 4 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=3&t=57608
73 1 Laurent GUERBY
74 6 Laurent GUERBY
<pre>
75 1 Laurent GUERBY
[admin@MikroTik-Ouin] > /interface ethernet print detail            
76 6 Laurent GUERBY
Flags: X - disabled, R - running, S - slave 
77 6 Laurent GUERBY
 0 R  name="ether1-gateway" mtu=1500 l2mtu=1600 mac-address=00:0C:42:D3:94:D5 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps 
78 1 Laurent GUERBY
 1    name="ether2-master-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D6 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto 
79 6 Laurent GUERBY
 2    name="ether3-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D7 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto 
80 10 Laurent GUERBY
 3 R  name="ether4-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D8 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on 
81 6 Laurent GUERBY
 4 R  name="ether5-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D9 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on 
82 6 Laurent GUERBY
</pre>
83 6 Laurent GUERBY
84 10 Laurent GUERBY
h2. RB250GS
85 1 Laurent GUERBY
86 14 Laurent GUERBY
http://wiki.mikrotik.com/wiki/SwOS
87 1 Laurent GUERBY
88 14 Laurent GUERBY
89 14 Laurent GUERBY
* vlan limitation mikrotik rb250gs http://forum.mikrotik.com/viewtopic.php?f=17&t=45721