Projet

Général

Profil

Mikrotik » Historique » Version 42

Laurent GUERBY, 13/11/2013 09:41

1 39 Laurent GUERBY
{{>toc}}
2 39 Laurent GUERBY
3 1 Laurent GUERBY
h1. Mikrotik
4 1 Laurent GUERBY
5 1 Laurent GUERBY
RouterOS
6 1 Laurent GUERBY
7 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/MikroTik_RouterOS
8 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:TOC
9 1 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Webfig
10 1 Laurent GUERBY
11 5 Laurent GUERBY
http://www.mikrotik.com/download.html
12 5 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Upgrading_RouterOS
13 5 Laurent GUERBY
14 27 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Supported_Hardware
15 33 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Password_reset
16 34 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:PoE-Out
17 27 Laurent GUERBY
18 15 Laurent GUERBY
h2. Boitiers
19 15 Laurent GUERBY
20 16 Laurent GUERBY
* Nice box : http://forum.mikrotik.com/viewtopic.php?p=297825#p297825
21 21 Laurent GUERBY
* http://www.mikrotik.com/mfm
22 21 Laurent GUERBY
* http://www.aerial.net/shop/product_info.php?products_id=1085
23 21 Laurent GUERBY
* http://www.stationbox.info/
24 21 Laurent GUERBY
25 23 Julien Aubé
* Boîtiers Rexel très chers
26 23 Julien Aubé
* http://www.technic-achat.com/coffret-electrique-ip66-imo,fr,4,144T_XX.cfm (144T0010)
27 23 Julien Aubé
* http://www.interprojekt.com.pl/gold-alubox-outdoor-waterproof-case-p-472.html
28 23 Julien Aubé
* http://www.materielelectrique.com/coffret-polyester-marina-ip66-ik10-7035-300x220x160-p-6579.html
29 23 Julien Aubé
30 15 Laurent GUERBY
31 20 Laurent GUERBY
h2. Montage
32 20 Laurent GUERBY
33 20 Laurent GUERBY
* http://shop.varia-store.com/product_info.php?info=p1390_RF-Elements-EasyBracket---EasyBracket-Universal.html
34 20 Laurent GUERBY
35 19 Laurent GUERBY
h2. PoE
36 19 Laurent GUERBY
37 19 Laurent GUERBY
* http://www.i4wifi.eu/en/EU-230V-powering/PoE-convertor-48-V-24-V-802-3af-at.html
38 19 Laurent GUERBY
39 32 Laurent GUERBY
h2. Password
40 32 Laurent GUERBY
41 32 Laurent GUERBY
From: 	Le Net du Kermeur
42 32 Laurent GUERBY
Utilitaire mtpass, ça se trouve là : http://manio.skyboo.net/mikrotik/
43 32 Laurent GUERBY
Ca se compile sous g++, donc sur n'importe quel Linux ou *BSD.
44 32 Laurent GUERBY
Testé sous OpenBSD, il fait le boulot.
45 32 Laurent GUERBY
46 40 Laurent GUERBY
h2. RB433L and RB433UAHL
47 40 Laurent GUERBY
48 40 Laurent GUERBY
h3. NPK
49 40 Laurent GUERBY
50 40 Laurent GUERBY
http://routing.explode.gr/node/96
51 40 Laurent GUERBY
https://forum.openwrt.org/viewtopic.php?id=32320&p=3
52 40 Laurent GUERBY
https://forum.openwrt.org/viewtopic.php?pid=165526#p165526
53 40 Laurent GUERBY
https://github.com/lqez/npk
54 40 Laurent GUERBY
Easy install of OpenWrt on MikroTik's devices https://forum.openwrt.org/viewtopic.php?id=39171
55 40 Laurent GUERBY
http://wp.ayufan.eu/2013/02/the-rb951g-and-openwrt/
56 40 Laurent GUERBY
57 40 Laurent GUERBY
h3. Misc
58 40 Laurent GUERBY
59 40 Laurent GUERBY
TODO
60 40 Laurent GUERBY
http://i.mt.lv/routerboard/files/rb433L-series-qg_1377089307.pdf
61 40 Laurent GUERBY
62 41 Laurent GUERBY
h3. Power Consuption
63 41 Laurent GUERBY
64 41 Laurent GUERBY
<pre>
65 41 Laurent GUERBY
eth1 = PoE        192.168.88.101/24
66 41 Laurent GUERBY
eth2 = milieu     192.168.102.1/24
67 41 Laurent GUERBY
eth3 = oppose PoE 192.168.103.1/24
68 41 Laurent GUERBY
wlan1 = minipci du bas 172.31.31.43/24
69 41 Laurent GUERBY
70 41 Laurent GUERBY
http://dslrouter.sourceforge.net/stuff/mikrotik/mikrotik/AirMax5_and_Mikrotik_Router_Board_Connection_Guide_revised.pdf
71 41 Laurent GUERBY
72 41 Laurent GUERBY
netboot 
73 41 Laurent GUERBY
rb750up http://forum.mikrotik.com/viewtopic.php?f=3&t=57943&start=50
74 41 Laurent GUERBY
75 41 Laurent GUERBY
USB RB750UP http://patchwork.openwrt.org/patch/3252/
76 41 Laurent GUERBY
77 41 Laurent GUERBY
http://wiki.openwrt.org/toh/mikrotik/rb750
78 41 Laurent GUERBY
http://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/
79 41 Laurent GUERBY
80 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Netinstall
81 41 Laurent GUERBY
http://routerboard.com/pricelist/download_file.php?file_id=118
82 41 Laurent GUERBY
83 41 Laurent GUERBY
http://www.gowifi.co.nz/userguides/perform-a-netinstall.pdf
84 41 Laurent GUERBY
85 41 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=2&t=66093
86 41 Laurent GUERBY
reset longer than 20 seconds
87 41 Laurent GUERBY
88 41 Laurent GUERBY
https://forum.openwrt.org/viewtopic.php?id=41490
89 41 Laurent GUERBY
90 41 Laurent GUERBY
RB433L
91 41 Laurent GUERBY
idle 108 mA 12V 
92 41 Laurent GUERBY
+1 eth 130mA 173 mA max au boot
93 41 Laurent GUERBY
94 41 Laurent GUERBY
RB433L + ethernet branché RouterOS 5.11
95 41 Laurent GUERBY
conso identique RouterOS 5.26
96 41 Laurent GUERBY
RouterOS 6.6 ?
97 41 Laurent GUERBY
Volt    mA  mW
98 41 Laurent GUERBY
(*  5.0 259)1295.0
99 41 Laurent GUERBY
(*  6.0 227)1362.0
100 41 Laurent GUERBY
(*  7.0 200)1400.0
101 41 Laurent GUERBY
(*  8.0 180)1440.0
102 41 Laurent GUERBY
(*  8.5 175)1487.5
103 41 Laurent GUERBY
(*  9.0 165)1485.0
104 41 Laurent GUERBY
(*  9.5 160)1520.0
105 41 Laurent GUERBY
(* 10.0 152)1520.0
106 41 Laurent GUERBY
(* 11.0 142)1562.0
107 41 Laurent GUERBY
(* 11.5 138)1587.0
108 41 Laurent GUERBY
(* 12.0 132)1584.0 152 pendant file upload  firmware (* 12.0 152)1824.0
109 41 Laurent GUERBY
(* 12.5 129)1612.5
110 41 Laurent GUERBY
(* 13.0 125)1625.0
111 41 Laurent GUERBY
(* 14.0 119)1666.0
112 41 Laurent GUERBY
(* 15.0 112)1680.0
113 41 Laurent GUERBY
(* 18.0  99)1782.0
114 41 Laurent GUERBY
(* 21.0  90)1890.0
115 41 Laurent GUERBY
(* 24.0  83)1992.0
116 41 Laurent GUERBY
(* 26.0  79)2054.0
117 41 Laurent GUERBY
(* 27.0  77)2079.0
118 41 Laurent GUERBY
119 41 Laurent GUERBY
RB433L sans ethernet
120 41 Laurent GUERBY
   V    mA  mW
121 41 Laurent GUERBY
4.0 off
122 41 Laurent GUERBY
(*  5.0 206)1030.0
123 41 Laurent GUERBY
(*  6.0 181)1086.0
124 41 Laurent GUERBY
(*  7.0 162)1134.0
125 41 Laurent GUERBY
(*  8.0 146)1168.0
126 41 Laurent GUERBY
(*  9.0 133)1197.0
127 41 Laurent GUERBY
(* 10.0 124)1240.0
128 41 Laurent GUERBY
(* 11.0 116)1276.0
129 41 Laurent GUERBY
(* 12.0 110)1320.0
130 41 Laurent GUERBY
(* 13.0 104)1352.0
131 41 Laurent GUERBY
(* 14.0  99)1386.0
132 41 Laurent GUERBY
(* 15.0  94)1410.0
133 41 Laurent GUERBY
134 41 Laurent GUERBY
diff ethernet pas ethernet constant en watt sur la plage de 265 mW a 260 mW
135 41 Laurent GUERBY
136 41 Laurent GUERBY
eth+ R52n-M  5180 AP-bridge 17dBm = 50 mW
137 41 Laurent GUERBY
(* 12.0 165)1980.0
138 41 Laurent GUERBY
vs (* 12.0 132)1584.0
139 41 Laurent GUERBY
140 41 Laurent GUERBY
0 dBm = 1 mW ou 7 dBm
141 41 Laurent GUERBY
conso inchangee
142 41 Laurent GUERBY
(* 12.0 163)1956.0
143 41 Laurent GUERBY
163-166
144 41 Laurent GUERBY
145 41 Laurent GUERBY
tout en bridge cote RB433L 7 dBm = 5 mW avec iperf 100M UDP
146 41 Laurent GUERBY
175-180
147 41 Laurent GUERBY
(* 12.0 (- 180 163))204.0 mW
148 41 Laurent GUERBY
149 41 Laurent GUERBY
serial http://forum.mikrotik.com/viewtopic.php?f=3&t=76194
150 41 Laurent GUERBY
http://wiki.openwrt.org/toh/mikrotik/rb433
151 41 Laurent GUERBY
152 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:Password_reset
153 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/MikroTik_Password_Recovery
154 41 Laurent GUERBY
155 41 Laurent GUERBY
http://wireless.kernel.org/en/users/Drivers/ath9k/devices
156 41 Laurent GUERBY
WLM200NX dual band
157 41 Laurent GUERBY
http://wireless.kernel.org/en/users/Drivers/ath5k
158 41 Laurent GUERBY
159 41 Laurent GUERBY
R52n-M
160 41 Laurent GUERBY
R52Hn
161 41 Laurent GUERBY
162 41 Laurent GUERBY
http://download2.mikrotik.com/routeros/5.26/routeros-mipsbe-5.26.npk
163 41 Laurent GUERBY
http://download2.mikrotik.com/routeros/6.6/routeros-mipsbe-6.6.npk
164 41 Laurent GUERBY
165 41 Laurent GUERBY
166 41 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Netinstall
167 41 Laurent GUERBY
168 41 Laurent GUERBY
</pre>
169 41 Laurent GUERBY
170 42 Laurent GUERBY
!conso-rb433l.png!
171 42 Laurent GUERBY
172 1 Laurent GUERBY
h2. RB750UP
173 1 Laurent GUERBY
174 1 Laurent GUERBY
http://routerboard.com/RB750UP
175 2 Laurent GUERBY
176 25 Laurent GUERBY
http://blog.lekermeur.net/wp-content/uploads/2012/03/Printemps2012_RB750.pdf
177 16 Laurent GUERBY
178 26 Laurent GUERBY
Attention : problèmes lors que le RB750UP est alimenté en PoE : http://forum.mikrotik.com/viewtopic.php?f=3&t=57943
179 26 Laurent GUERBY
> we are working on new FW that would add useful features that are currently missing. One of them is reworked power management.
180 26 Laurent GUERBY
181 12 Laurent GUERBY
Voltage : http://forum.mikrotik.com/viewtopic.php?f=3&t=58124
182 13 Laurent GUERBY
> limit on power out port is 500mA regardless of output voltage. so at 12V you will be able to power only MAX 6W device. while at 30V 15W.
183 13 Laurent GUERBY
> If you power RB570UP with PoE 24V adapter over 100m cable, then resulting output voltage at full load (all 4 ports giving out 500mA totaling to 2A) then voltage to powered ports at RB750UP end will be around 21V then losses on cable and protections you end up with around 19V at the end device. and cables stretching for 200m from PSU brick.
184 13 Laurent GUERBY
> PoE in port has no input limitation only output is limited to 500mA and with 4 prots it is 2A
185 12 Laurent GUERBY
186 35 Laurent GUERBY
Upgrade to 5.20
187 35 Laurent GUERBY
188 35 Laurent GUERBY
<pre>
189 35 Laurent GUERBY
190 35 Laurent GUERBY
[admin@MikroTik] /interface ethernet poe settings> upgrade
191 35 Laurent GUERBY
Do you really want to upgrade PoE firmware? [y/n] 
192 35 Laurent GUERBY
y
193 35 Laurent GUERBY
Please reboot to finish PoE firmware upgrade.
194 35 Laurent GUERBY
195 35 Laurent GUERBY
[admin@MikroTik] /interface ethernet poe settings> pr
196 35 Laurent GUERBY
                   version: 2.0
197 35 Laurent GUERBY
  ether1-poe-in-long-cable: no
198 35 Laurent GUERBY
199 35 Laurent GUERBY
[admin@MikroTik] /interface ethernet poe> monitor [find]
200 35 Laurent GUERBY
               name: ether2-master-local ether3-slave-local ether4-slave-local ether5-slave-local
201 35 Laurent GUERBY
    poe-out-voltage:                                                           23.5V
202 35 Laurent GUERBY
    poe-out-current:                                                           160mA
203 35 Laurent GUERBY
      poe-out-power:                                                           3.7W
204 35 Laurent GUERBY
</pre>
205 35 Laurent GUERBY
206 35 Laurent GUERBY
207 12 Laurent GUERBY
208 7 Laurent GUERBY
* http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS
209 7 Laurent GUERBY
* To update firmware (latest RouterOS 5.12):
210 7 Laurent GUERBY
* Files / upload choose file : routeros-mipsbe-5.12.npk (12MB)
211 7 Laurent GUERBY
* Attendre la fin de upload
212 7 Laurent GUERBY
* System / Packages / IPv6 schedule for update
213 7 Laurent GUERBY
* System / Reboot
214 8 Laurent GUERBY
* about 90 seconds. Note: PoE will be cut during the reboot
215 7 Laurent GUERBY
216 7 Laurent GUERBY
chiwa admin VLAN 3175
217 1 Laurent GUERBY
192.168.3.20
218 1 Laurent GUERBY
219 1 Laurent GUERBY
telnet login admin pass (vide)
220 1 Laurent GUERBY
web
221 1 Laurent GUERBY
222 3 Jérôme Nicolle
223 3 Jérôme Nicolle
<pre>
224 3 Jérôme Nicolle
[admin@rb750up-chiwawa] > interface ethernet print                                                                 
225 3 Jérôme Nicolle
Flags: X - disabled, R - running, S - slave 
226 3 Jérôme Nicolle
 #    NAME                               MTU MAC-ADDRESS       ARP        MASTER-PORT                            SWITCH                           
227 3 Jérôme Nicolle
 0    ether1-gateway                    1500 00:0C:42:E9:BA:8A enabled   
228 3 Jérôme Nicolle
 1 R  ;;; To chiwa's router *** NO POE ***
229 3 Jérôme Nicolle
      ether2-master-local               1500 00:0C:42:E9:BA:8B enabled    none                                   switch1                          
230 3 Jérôme Nicolle
 2 RS ;;; to Vince' NS5M -  To Myrys
231 3 Jérôme Nicolle
      ether3-slave-local                1500 00:0C:42:E9:BA:8C enabled    ether2-master-local                    switch1                          
232 3 Jérôme Nicolle
 3 RS ;;; to NS5M east - To CDRX
233 3 Jérôme Nicolle
      ether4-slave-local                1500 00:0C:42:E9:BA:8D enabled    ether2-master-local                    switch1                          
234 3 Jérôme Nicolle
 4 RS ;;; to beaconing NS5M (port balcon.3)
235 3 Jérôme Nicolle
      ether5-slave-local                1500 00:0C:42:E9:BA:8E enabled    ether2-master-local                    switch1         
236 3 Jérôme Nicolle
</pre>
237 3 Jérôme Nicolle
238 28 Laurent GUERBY
RouterOS v2
239 28 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:PoE-Out#RouterOS_2   
240 28 Laurent GUERBY
http://wiki.mikrotik.com/wiki/Manual:PoE-Out#Changes_between_1.x_and_2.0_PoE-Out_controller_firmware
241 28 Laurent GUERBY
<pre>
242 28 Laurent GUERBY
[admin@MikroTik] > interface ethernet poe monitor [find]
243 28 Laurent GUERBY
              name: ether2 ether3 ether4 ether5
244 28 Laurent GUERBY
   poe-out-voltage: 23.2V  23.2V  23.2V  
245 28 Laurent GUERBY
   poe-out-current: 224mA  116mA  64mA   
246 28 Laurent GUERBY
     poe-out-power: 5.1W   2.6W   1.4W 
247 28 Laurent GUERBY
</pre>
248 28 Laurent GUERBY
249 11 Laurent GUERBY
http://wiki.mikrotik.com/wiki/PoE-Out
250 3 Jérôme Nicolle
251 11 Laurent GUERBY
/interface ethernet set ether2 poe-out=on
252 2 Laurent GUERBY
/interface ethernet set ether2 poe-out=off
253 2 Laurent GUERBY
/interface ethernet set ether2 poe-out=auto
254 11 Laurent GUERBY
255 11 Laurent GUERBY
Note:
256 11 Laurent GUERBY
<obinou> Le poe-out, il faut le mettre à "on" , et pas à "auto".
257 11 Laurent GUERBY
<obinou> sans ça, j'ai l'impression que le RB fait un power-cycle si il détecte une perte de link
258 11 Laurent GUERBY
<obinou> or, quand la NSM5 démarre, entre le bootloader & le firmware ca perd le link
259 11 Laurent GUERBY
<obinou> conclusion: reboot en boucle.
260 1 Laurent GUERBY
261 22 Julien Aubé
Note:
262 22 Julien Aubé
Après essais il est préférable d'éviter le 12V: Si au départ ça semble marcher, les pics de courants
263 22 Julien Aubé
dépassent parfois la limite autorisé par port de 500mA, et le port se coupe immédiatement.
264 22 Julien Aubé
Le 24V n'a pas montré ce souci.
265 22 Julien Aubé
266 24 Julien Aubé
Note 2: 
267 24 Julien Aubé
Dans les derniers firmwares Microtik, l'option "poe-out" prend comme option "auto", "forced-on", ou "forced-off".
268 24 Julien Aubé
269 2 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=3&t=49976&sid=40ea9661791968a896ab35214dc18f15&start=50
270 4 Laurent GUERBY
http://forum.mikrotik.com/viewtopic.php?f=3&t=57608
271 1 Laurent GUERBY
272 6 Laurent GUERBY
<pre>
273 1 Laurent GUERBY
[admin@MikroTik-Ouin] > /interface ethernet print detail            
274 6 Laurent GUERBY
Flags: X - disabled, R - running, S - slave 
275 6 Laurent GUERBY
 0 R  name="ether1-gateway" mtu=1500 l2mtu=1600 mac-address=00:0C:42:D3:94:D5 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps 
276 1 Laurent GUERBY
 1    name="ether2-master-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D6 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto 
277 6 Laurent GUERBY
 2    name="ether3-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D7 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto 
278 10 Laurent GUERBY
 3 R  name="ether4-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D8 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on 
279 6 Laurent GUERBY
 4 R  name="ether5-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D9 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on 
280 6 Laurent GUERBY
</pre>
281 6 Laurent GUERBY
282 29 Laurent GUERBY
<pre>
283 29 Laurent GUERBY
[admin@MikroTik-Ouin] > sys resource pr
284 29 Laurent GUERBY
                   uptime: 6m6s
285 29 Laurent GUERBY
                  version: 5.12
286 29 Laurent GUERBY
              free-memory: 17880KiB
287 29 Laurent GUERBY
             total-memory: 29708KiB
288 29 Laurent GUERBY
                      cpu: MIPS 24Kc V7.4
289 29 Laurent GUERBY
                cpu-count: 1
290 29 Laurent GUERBY
            cpu-frequency: 400MHz
291 29 Laurent GUERBY
                 cpu-load: 0%
292 29 Laurent GUERBY
           free-hdd-space: 30844KiB
293 29 Laurent GUERBY
          total-hdd-space: 61440KiB
294 29 Laurent GUERBY
  write-sect-since-reboot: 214
295 29 Laurent GUERBY
         write-sect-total: 96113
296 29 Laurent GUERBY
               bad-blocks: 0%
297 29 Laurent GUERBY
        architecture-name: mipsbe
298 29 Laurent GUERBY
               board-name: RB750UP
299 29 Laurent GUERBY
                 platform: MikroTik
300 29 Laurent GUERBY
</pre>
301 29 Laurent GUERBY
302 38 Laurent GUERBY
h3. NTP
303 38 Laurent GUERBY
304 38 Laurent GUERBY
<pre>
305 38 Laurent GUERBY
/system ntp client set primary-ntp=172.31.31.254 enabled=yes
306 38 Laurent GUERBY
</pre>
307 38 Laurent GUERBY
308 39 Laurent GUERBY
h3. rsyslog
309 39 Laurent GUERBY
310 39 Laurent GUERBY
http://randomtweaks.blogspot.fr/2013/03/mikrotik-remote-logging-using-ubuntu.html
311 39 Laurent GUERBY
312 39 Laurent GUERBY
<pre>
313 39 Laurent GUERBY
/system log action set 3 remote=172.31.31.252
314 39 Laurent GUERBY
</pre>
315 38 Laurent GUERBY
316 17 Jérôme Nicolle
h2. Bridging sur le 750UP
317 17 Jérôme Nicolle
318 18 Jérôme Nicolle
Le RB750UP est conçu dans l'idée d'en faire un CPE multi-antennes. Par défaut, le port 1 (POE-in ou LAN) n'est pas bridgé sur le switch des 4 ports POE-out, on s'en sert plutôt en mode routé.
319 18 Jérôme Nicolle
320 18 Jérôme Nicolle
Pour l'utiliser comme un simple switch et non comme un routeur il suffit de créer un bridge entre les interfaces :
321 18 Jérôme Nicolle
322 17 Jérôme Nicolle
<pre>
323 17 Jérôme Nicolle
[admin@rb750up-chiwawa] > interface bridge add name=bridge1 
324 17 Jérôme Nicolle
[admin@rb750up-chiwawa] > interface bridge port add bridge=bridge1 interface=ether1-gateway 
325 17 Jérôme Nicolle
[admin@rb750up-chiwawa] > interface bridge port add bridge=bridge1 interface=ether2-master-local 
326 1 Laurent GUERBY
</pre>
327 22 Julien Aubé
328 37 Laurent GUERBY
h2. DHCP sur le 750UP
329 37 Laurent GUERBY
330 22 Julien Aubé
Note: Attention, un serveur DHCP est actif par défaut sur les ports 2 à 5. Il faut le désactiver
331 22 Julien Aubé
pour passer en mode switch.
332 17 Jérôme Nicolle
333 37 Laurent GUERBY
<pre>
334 37 Laurent GUERBY
ip dhcp-server print
335 37 Laurent GUERBY
ip dhcp-server remove 0
336 37 Laurent GUERBY
</pre>
337 37 Laurent GUERBY
338 37 Laurent GUERBY
h2. Routing sur le 750UP
339 37 Laurent GUERBY
340 37 Laurent GUERBY
<pre>
341 37 Laurent GUERBY
ip route add dst-address=0.0.0.0/0 gateway=172.16.0.254
342 37 Laurent GUERBY
</pre>
343 17 Jérôme Nicolle
344 10 Laurent GUERBY
h2. RB250GS
345 1 Laurent GUERBY
346 30 Laurent GUERBY
VLAN http://wiki.mikrotik.com/wiki/SwOS/Router-On-A-Stick
347 30 Laurent GUERBY
Doc http://wiki.mikrotik.com/wiki/SwOS
348 30 Laurent GUERBY
vlan limitation mikrotik rb250gs http://forum.mikrotik.com/viewtopic.php?f=17&t=45721
349 31 Jocelyn Dealande
Routeur, switch, VLAN et multi-modems (via rb250gs) http://doc.rhizome-fai.net/doku.php?id=technique:routeur:vlan
350 36 Mehdi Abaakouk
351 36 Mehdi Abaakouk
352 36 Mehdi Abaakouk
353 36 Mehdi Abaakouk
h2. RB750UP en mode BOX pour les nanostation
354 36 Mehdi Abaakouk
355 36 Mehdi Abaakouk
Connection to the routerboard
356 36 Mehdi Abaakouk
357 36 Mehdi Abaakouk
<pre>
358 36 Mehdi Abaakouk
ssh admin@192.168.88.1
359 36 Mehdi Abaakouk
</pre>
360 36 Mehdi Abaakouk
361 36 Mehdi Abaakouk
Reset the RouterBoard :
362 36 Mehdi Abaakouk
<pre>
363 36 Mehdi Abaakouk
$ setup 
364 36 Mehdi Abaakouk
$ r
365 36 Mehdi Abaakouk
$ y
366 36 Mehdi Abaakouk
</pre>
367 36 Mehdi Abaakouk
368 36 Mehdi Abaakouk
Le routerboard reboot et on se reconnect
369 36 Mehdi Abaakouk
370 36 Mehdi Abaakouk
Configuration du WAN
371 36 Mehdi Abaakouk
372 36 Mehdi Abaakouk
<pre>
373 36 Mehdi Abaakouk
$ ip address add address=91.224.149.194/24 interface=ether1-gateway
374 36 Mehdi Abaakouk
$ ip route add gateway=91.224.149.254
375 36 Mehdi Abaakouk
$ ip address print 
376 36 Mehdi Abaakouk
$ ip route print 
377 36 Mehdi Abaakouk
</pre>