{{>toc}}

h1. Services

h2. Liens

* http://mixart-myrys.org/

* plan http://mixart-myrys.org/le-lieu/

* [[Myrys_Services| Services]]

* [[Myrys_TODO | Services TODO]]

h2. PC Services de Myrys

h3. Infos/Config PC

91.224.149.192/24

2a01:6600:8081:c000::/56

fe80::81:c0

Carte mere MSI MS-7756 = H77MA-G43 http://fr.msi.com/product/mb/H77MA-G43.html

Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz 2C/4T http://ark.intel.com/products/65693/Intel-Core-i3-3220-Processor-(3M-Cache-3_30-GHz)

2x2 = 4 GB RAM

HDD 1.5TBx2 en RAID1+LVM

Soft installé dessus:

* Bmon pour superviser la bande passante

Idées de softs à installer dessus :

* bluemind pour une gestion de mail, calendrier/planning, contacts

* owncloud pour faire un serveur de fichiers avec synchro depuis android/linux/windows

h3. Config VLAN

Avant

<pre>

auto lo

iface lo inet loopback

auto eth0

auto eth0.3131

iface eth0.3131 inet static

	address 91.224.149.192

	netmask 255.255.255.0

	gateway 91.224.149.254

	vlan_raw_device eth0

auto eth0.20

iface eth0.20 inet static

	address 10.20.0.29

	netmask 255.255.255.0

	vlan_raw_device eth0

</pre>

apres

<pre>

auto eth0

auto eth0.3131

iface eth0.3131 inet manual

        vlan_raw_device eth0

auto br3131

iface br3131 inet static

        bridge_ports eth0.3131

        address 91.224.149.192

        netmask 255.255.255.0

        gateway 91.224.149.254

auto eth0.20

iface eth0.20 inet manual

        vlan_raw_device eth0

auto br20

iface br20 inet static

        bridge_ports eth0.20

        address 10.20.0.29

        netmask 255.255.224.0

</pre>

reload network

$ screen

$ ip link del eth0.3131 ; ip link del eth0.20 ; ip link set eth0 down ; service networking restart ;

h3. Configuration dnsmasq

dans /etc/dnsmasq.d/myrys.conf:

<pre>

interface=br20

enable-ra

dhcp-range=10.20.0.60,10.20.15.199,255.255.224.0,3600

dhcp-range=2a01:6600:8081:c0c0::2,2a01:6600:8081:c0c0:FFFF:FFFF:FFFF:FFFF,ra-only,64,3600

dhcp-option=option6:dns-server,[2a01:6600:8081:c0c0::1]

</pre>

Note: il faut le dnsmasq de wheezy pour que enable-ra soit reconnu

<pre>

dnsmasq_2.62-3+deb7u1_all.deb                                                                                                                                                                           100%   16KB  16.0KB/s   00:00    

dnsmasq-base_2.62-3+deb7u1_amd64.deb                                                                                                                                                                    100%  362KB 362.2KB/s   00:00    

dnsmasq-utils_2.62-3+deb7u1_amd64.deb 

</pre>

Puis forwarding et masquerade dans /etc/rc.local :

<pre>

echo 1 > /proc/sys/net/ipv4/ip_forward

echo 1 > /proc/sys/net/ipv6/conf/all/forwarding

echo 1 > /proc/sys/net/ipv6/conf/default/forwarding

iptables -t nat -A POSTROUTING -s "10.20.0.0/24" ! -d "10.20.0.0/24" -j MASQUERADE

</pre>

IPv6 manuel dans /etc/rc.local

<pre>

ip -6 addr add fe80::81:c0/64 dev br3131

ip -6 addr add 2a01:6600:8081:c000::1/56 dev br3131

ip -6 route add default via fe80::31 dev br3131

ip addr add 10.20.0.1/24 dev br20

ip -6 addr add 2a01:6600:8081:c0c0::2/64 dev br20

</pre>

h1. Picostation

<pre>

MAC               Lieu                 IP 10.20.0.x IP 169.254 Channel Note

                                       10.20.0.1                       PC chaussette

                                       10.20.0.2                       TODO switch

00:27:22:04:12:48 salle 3 vidéo        10.20.0.3    18.72      1       Pico2 APSalle3 PoE dans container tetalab

00:27:22:05:12:4B bureau               10.20.0.4    18.75      6       Pico2 APBureau PoE au bureau

00:27:22:05:12:E3 salle 1 théâtre      10.20.0.5    18.227     6       Pico2 APSalle1 PoE marqué salle AG

00:27:22:05:12:7F tetalab              10.20.0.6    18.127     11      Pico2 APTetalab Prise électrique derrière le container avec du jeu / reboot fréquent

                                       10.20.0.7

00:27:22:05:13:29 TODO                 10.20.0.8    19.41      11      Pico2 APTODO recup 20140831 / KO disparu 20140416 ? AP6 PoE a coté CISCO / reboot fréquent

                                       10.20.0.9

00:27:22:41:D0:58 regie                10.20.0.10   208.88     1       Pico2 APRegie PoE marqué salle AG

A0:F3:C1:93:B0:61 TLS00                10.20.0.11              6       TPLink 740N TLS00 SSID tetaneutral.net

e8:94:f6:3f:40:2e Edition              10.20.0.12                      TPLink 4300 APEdition dual band

                                       10.20.0.13

10:fe:ed:82:99:f3 salle AG             10.20.0.14              11      TPLink 740N APAG salle AG cable marqué baie freebox

                                       10.20.0.15

                                       10.20.0.16

                                       10.20.0.17

                                       10.20.0.18

                                       10.20.0.19

Old:

            83:99 bureau sophie WRT54G 10.20.0.9    ??.??              KO offline / WRT54G a ne pas utiliser mauvaise configuration non compatible avec ubnt

00:27:22:05:13:16 local atelier Sophie 10.20.0.7    19.22      1       KO AP5 Switch de distribution pour .3 .6 et .7 disjoncteur a gauche sur le central  / reboot fréquent

</pre>

10.20.0.1 pcmyrys (was: CISCO 3725)

10.20.0.2 unused was: CISCO 2900XL

10.20.0.3 => 19 reserved Wifi

10.20.0.20 reserved guerby

10.20.0.21 tth Sun Blade  IP1

10.20.0.22 tth machine multi-fonction THSF 2015 - _FatalError et tTh_

10.20.0.23 tth machine de stream audio pour THSF

10.20.0.24 tth raspberry pi IP4

10.20.0.25

10.20.0.26

10.20.0.27

10.20.0.28 pc VM sur chaussette

10.20.0.29 pcmyrys aka "chaussette"

10.20.0.30 nagios ttnn

10.20.0.31 h7 ttnn

10.20.0.32 nucnagios ttnn

10.20.0.33 radioradio redirect 8000 via socat

10.20.0.34

10.20.0.35 nuitdebout TP-Link salle AG 

10.20.0.36

10.20.0.37

10.20.0.38

10.20.0.39

10.20.0.40 mPower

10.20.0.41 dpdk1

10.20.0.42 dpdk2

10.20.0.43 dpdk3

<pre>

nohup socat TCP4-LISTEN:8000,bind=91.224.149.192,reuseaddr,fork TCP4:10.20.0.33:8000,bind=10.20.0.29 >& /dev/null < /dev/null &

</pre>

dhcp-range=10.20.0.60,10.20.20.199

dhcp-range=2a01:6600:8081:c0c0::2,2a01:6600:8081:c0c0:FFFF:FFFF:FFFF:FFFF

10.20.0.0/19

netmask 255.255.224.0 gw et DNS 10.20.0.29

AP1

10.20.0.3/24

10.20.0.1

 00:27:22:04:12:48

AP2

10.20.0.4/24

10.20.0.1

 00:27:22:04:12:4B

AP3

10.20.0.5/24

10.20.0.1

 00:27:22:05:12:E3

AP4

10.20.0.6/24

10.20.0.1

 00:27:22:04:12:7F

AP5

10.20.0.7/24

10.20.0.1

 00:27:22:04:13:16

AP6

10.20.0.8/24

10.20.0.1

Linksys

? (192.168.123.1) at 00:16:b6:39:83:97 [ether] on wlan0

10.20.0.9 dev eth0.20 lladdr 00:16:b6:39:83:97 REACHABLE

Nmap scan report for 10.20.0.1

Host is up (0.0066s latency).

MAC Address: 00:11:21:8D:DA:F1 (Cisco Systems)

Nmap scan report for 10.20.0.2

Host is up (0.0072s latency).

MAC Address: 00:04:28:D1:0E:00 (Cisco Systems)

Nmap scan report for 10.20.0.3

Host is up (0.0068s latency).

MAC Address: 00:27:22:04:12:48 (Ubiquiti Networks)

Nmap scan report for 10.20.0.4

Host is up (0.0070s latency).

MAC Address: 00:27:22:04:12:4B (Ubiquiti Networks)

Nmap scan report for 10.20.0.5

Host is up (0.0073s latency).

MAC Address: 00:27:22:04:12:E3 (Ubiquiti Networks)

Nmap scan report for 10.20.0.6

Host is up (0.011s latency).

MAC Address: 00:27:22:04:12:7F (Ubiquiti Networks)

Nmap scan report for 10.20.0.7

Host is up (0.011s latency).

MAC Address: 00:27:22:04:13:16 (Ubiquiti Networks)

Nmap scan report for 10.20.0.8

Host 10.20.0.8 is up (0.0011s latency).

MAC Address: 00:27:22:04:13:29 (Ubiquiti Networks)

Nmap scan report for 10.20.0.9

Host 10.20.0.9 is up (0.00076s latency).

MAC Address: 00:16:B6:39:83:97 (Cisco-Linksys)

 00:27:22:05:13:29

 00:27:22:04:13:29

h1. APAG

Monitoring installation:

Sur l'AP:

<pre>

$ opkg update

$ opkg install xinetd

$ opkg install bash

</pre>

Sur h2:

<pre>

scp /etc/xinetd.d/check_mk 10.20.0.14:/etc/xinetd.d/

scp /usr/bin/check_mk_agent 10.20.0.14:/usr/bin/

</pre>

Sur l'AP:

<pre>

$ vi /usr/bin/check_mk_agent

# Change sheban to #!/bin/sh

# line 67, remove the keywork "function" from the run_cached function

# remove the virtualbox check.

$ /etc/init.d/xinetd enable

$ /etc/init.d/xinetd start

</pre>

h1. InfraMyrys

* [[InfraMyrys]]

h1. Fibres

* [[FibreMyrys]]