Preseed » Historique » Version 4
Mehdi Abaakouk, 16/06/2015 19:08
1 | 1 | Laurent GUERBY | {{>toc}} |
---|---|---|---|
2 | 1 | Laurent GUERBY | |
3 | 1 | Laurent GUERBY | h1. Preseed |
4 | 1 | Laurent GUERBY | |
5 | 1 | Laurent GUERBY | h2. Documentation |
6 | 1 | Laurent GUERBY | |
7 | 1 | Laurent GUERBY | This page document a preseed setup in an environment where you already have a DHCP server. The idea is to add a PXE server that will do only the PXE part of the work. |
8 | 1 | Laurent GUERBY | |
9 | 1 | Laurent GUERBY | Assuming : |
10 | 1 | Laurent GUERBY | * on the PXE server : apt-get install dnsmasq |
11 | 1 | Laurent GUERBY | * you have a DHCP (no PXE) server at 10.2.255.254 |
12 | 1 | Laurent GUERBY | * your PXE server interface is eth0 |
13 | 1 | Laurent GUERBY | * your PXE server IP on eth0 is 10.2.137.101 |
14 | 1 | Laurent GUERBY | * you have an http proxy which will be useful to cache locally all downloaded packages, here : http://cache.ut-capitole.fr:3128 |
15 | 1 | Laurent GUERBY | |
16 | 1 | Laurent GUERBY | h2. Files |
17 | 1 | Laurent GUERBY | |
18 | 2 | Laurent GUERBY | h3. dnsmasq |
19 | 2 | Laurent GUERBY | |
20 | 1 | Laurent GUERBY | <pre> |
21 | 1 | Laurent GUERBY | root@c1:~# cat /etc/dnsmasq.d/pxeu.conf |
22 | 1 | Laurent GUERBY | # disable dns |
23 | 1 | Laurent GUERBY | port=0 |
24 | 1 | Laurent GUERBY | |
25 | 1 | Laurent GUERBY | interface=eth0 |
26 | 1 | Laurent GUERBY | |
27 | 1 | Laurent GUERBY | # replace with real dhcp server |
28 | 1 | Laurent GUERBY | #dhcp-range=192.168.1.0,proxy |
29 | 1 | Laurent GUERBY | dhcp-range=10.2.255.254,proxy |
30 | 1 | Laurent GUERBY | |
31 | 1 | Laurent GUERBY | # Tell PXE clients not to use multicast discovery |
32 | 1 | Laurent GUERBY | dhcp-option=vendor:PXEClient,6,2b |
33 | 1 | Laurent GUERBY | dhcp-no-override |
34 | 1 | Laurent GUERBY | |
35 | 1 | Laurent GUERBY | # Enable this for better debugging |
36 | 1 | Laurent GUERBY | #log-dhcp |
37 | 1 | Laurent GUERBY | |
38 | 1 | Laurent GUERBY | enable-tftp |
39 | 1 | Laurent GUERBY | tftp-root=/var/lib/tftpboot |
40 | 1 | Laurent GUERBY | pxe-service=x86PC, "Install Linux", pxelinux |
41 | 1 | Laurent GUERBY | </pre> |
42 | 1 | Laurent GUERBY | |
43 | 2 | Laurent GUERBY | h3. tftpboot |
44 | 2 | Laurent GUERBY | |
45 | 2 | Laurent GUERBY | Run the following script: |
46 | 2 | Laurent GUERBY | |
47 | 1 | Laurent GUERBY | <pre> |
48 | 1 | Laurent GUERBY | root@c1:~# cat pxe-setup.sh |
49 | 1 | Laurent GUERBY | #!/bin/bash |
50 | 1 | Laurent GUERBY | set -x |
51 | 1 | Laurent GUERBY | |
52 | 1 | Laurent GUERBY | YOURMIRROR=archive.ubuntu.com |
53 | 1 | Laurent GUERBY | ARCH=amd64 |
54 | 1 | Laurent GUERBY | VENDOR=ubuntu |
55 | 1 | Laurent GUERBY | DIST=trusty |
56 | 1 | Laurent GUERBY | DEST=/var/lib/tftpboot |
57 | 1 | Laurent GUERBY | |
58 | 1 | Laurent GUERBY | mkdir -p $DEST |
59 | 1 | Laurent GUERBY | cd $DEST |
60 | 1 | Laurent GUERBY | |
61 | 1 | Laurent GUERBY | rm -rf netboot.tar.gz Release* SHA* ${VENDOR}-installer version.info pxelinux.0 pxelinux.cfg ldlinux.c32 |
62 | 1 | Laurent GUERBY | wget -q http://"$YOURMIRROR"/${VENDOR}/dists/${DIST}/main/installer-"$ARCH"/current/images/netboot/netboot.tar.gz |
63 | 1 | Laurent GUERBY | wget -q http://"$YOURMIRROR"/${VENDOR}/dists/${DIST}/main/installer-"$ARCH"/current/images/SHA256SUMS |
64 | 1 | Laurent GUERBY | wget -q http://"$YOURMIRROR"/${VENDOR}/dists/${DIST}/Release |
65 | 1 | Laurent GUERBY | wget -q http://"$YOURMIRROR"/${VENDOR}/dists/${DIST}/Release.gpg |
66 | 1 | Laurent GUERBY | tar -xzf netboot.tar.gz |
67 | 1 | Laurent GUERBY | </pre> |
68 | 1 | Laurent GUERBY | |
69 | 2 | Laurent GUERBY | h3. preseed.cfg |
70 | 2 | Laurent GUERBY | |
71 | 1 | Laurent GUERBY | <pre> |
72 | 1 | Laurent GUERBY | root@c1:/var/lib/tftpboot# cat preseed.cfg |
73 | 1 | Laurent GUERBY | ### Localization |
74 | 1 | Laurent GUERBY | # Preseeding only locale sets language, country and locale. |
75 | 1 | Laurent GUERBY | d-i debian-installer/locale string en_US.UTF-8 |
76 | 1 | Laurent GUERBY | |
77 | 1 | Laurent GUERBY | # Keyboard selection. |
78 | 1 | Laurent GUERBY | # Disable automatic (interactive) keymap detection. |
79 | 1 | Laurent GUERBY | d-i console-setup/ask_detect boolean false |
80 | 1 | Laurent GUERBY | d-i keyboard-configuration/layoutcode string fr |
81 | 1 | Laurent GUERBY | |
82 | 1 | Laurent GUERBY | ### Network configuration |
83 | 1 | Laurent GUERBY | # netcfg will choose an interface that has link if possible. This makes it |
84 | 1 | Laurent GUERBY | # skip displaying a list if there is more than one interface. |
85 | 1 | Laurent GUERBY | d-i netcfg/choose_interface select auto |
86 | 1 | Laurent GUERBY | |
87 | 1 | Laurent GUERBY | # Just in case our DHCP server is busy. |
88 | 1 | Laurent GUERBY | d-i netcfg/dhcp_timeout string 60 |
89 | 1 | Laurent GUERBY | |
90 | 1 | Laurent GUERBY | # Any hostname and domain names assigned from dhcp take precedence over |
91 | 1 | Laurent GUERBY | # values set here. However, setting the values still prevents the questions |
92 | 1 | Laurent GUERBY | # from being shown, even if values come from dhcp. |
93 | 1 | Laurent GUERBY | d-i netcfg/get_hostname string unassigned-hostname |
94 | 1 | Laurent GUERBY | d-i netcfg/get_domain string unassigned-domain |
95 | 1 | Laurent GUERBY | |
96 | 1 | Laurent GUERBY | # Disable that annoying WEP key dialog. |
97 | 1 | Laurent GUERBY | d-i netcfg/wireless_wep string |
98 | 1 | Laurent GUERBY | |
99 | 1 | Laurent GUERBY | # Always install the server kernel |
100 | 1 | Laurent GUERBY | d-i base-installer/kernel/override-image string linux-server |
101 | 1 | Laurent GUERBY | |
102 | 1 | Laurent GUERBY | ### Mirror settings |
103 | 1 | Laurent GUERBY | # Alternatively: by default, the installer uses CC.archive.ubuntu.com where |
104 | 1 | Laurent GUERBY | # CC is the ISO-3166-2 code for the selected country. You can preseed this |
105 | 1 | Laurent GUERBY | # so that it does so without asking. |
106 | 1 | Laurent GUERBY | d-i mirror/http/mirror select archive.ubuntu.com |
107 | 1 | Laurent GUERBY | d-i mirror/http/proxy string http://cache.ut-capitole.fr:3128 |
108 | 1 | Laurent GUERBY | |
109 | 1 | Laurent GUERBY | ### Clock and time zone setup |
110 | 1 | Laurent GUERBY | # Controls whether or not the hardware clock is set to UTC. |
111 | 1 | Laurent GUERBY | d-i clock-setup/utc boolean true |
112 | 1 | Laurent GUERBY | |
113 | 1 | Laurent GUERBY | # You may set this to any valid setting for $TZ; see the contents of |
114 | 1 | Laurent GUERBY | # /usr/share/zoneinfo/ for valid values. |
115 | 1 | Laurent GUERBY | d-i time/zone string Etc/UTC |
116 | 1 | Laurent GUERBY | |
117 | 1 | Laurent GUERBY | # Controls whether to use NTP to set the clock during the install |
118 | 1 | Laurent GUERBY | d-i clock-setup/ntp boolean true |
119 | 1 | Laurent GUERBY | |
120 | 1 | Laurent GUERBY | ### Partitioning |
121 | 1 | Laurent GUERBY | d-i partman-auto/disk string /dev/sda |
122 | 1 | Laurent GUERBY | |
123 | 1 | Laurent GUERBY | # The presently available methods are: |
124 | 1 | Laurent GUERBY | # - regular: use the usual partition types for your architecture |
125 | 1 | Laurent GUERBY | # - lvm: use LVM to partition the disk |
126 | 1 | Laurent GUERBY | # - crypto: use LVM within an encrypted partition |
127 | 1 | Laurent GUERBY | d-i partman-auto/method string regular |
128 | 1 | Laurent GUERBY | |
129 | 1 | Laurent GUERBY | # If one of the disks that are going to be automatically partitioned |
130 | 1 | Laurent GUERBY | # contains an old LVM configuration, the user will normally receive a |
131 | 1 | Laurent GUERBY | # warning. This can be preseeded away... |
132 | 1 | Laurent GUERBY | d-i partman-lvm/device_remove_lvm boolean true |
133 | 1 | Laurent GUERBY | # The same applies to pre-existing software RAID array: |
134 | 1 | Laurent GUERBY | d-i partman-md/device_remove_md boolean true |
135 | 1 | Laurent GUERBY | # And the same goes for the confirmation to write the lvm partitions. |
136 | 1 | Laurent GUERBY | d-i partman-lvm/confirm boolean true |
137 | 1 | Laurent GUERBY | |
138 | 1 | Laurent GUERBY | # For LVM partitioning, you can select how much of the volume group to use |
139 | 1 | Laurent GUERBY | # for logical volumes. |
140 | 1 | Laurent GUERBY | #d-i partman-auto-lvm/guided_size string max |
141 | 1 | Laurent GUERBY | |
142 | 1 | Laurent GUERBY | # You can choose one of the three predefined partitioning recipes: |
143 | 1 | Laurent GUERBY | # - atomic: all files in one partition |
144 | 1 | Laurent GUERBY | # - home: separate /home partition |
145 | 1 | Laurent GUERBY | # - multi: separate /home, /usr, /var, and /tmp partitions |
146 | 1 | Laurent GUERBY | # d-i partman-auto/choose_recipe select atomic |
147 | 1 | Laurent GUERBY | d-i partman-auto/expert_recipe string root :: 2048 30720 20000000 ext4 \ |
148 | 1 | Laurent GUERBY | $primary{ } $bootable{ } \ |
149 | 1 | Laurent GUERBY | method{ format } format{ } \ |
150 | 1 | Laurent GUERBY | use_filesystem{ } filesystem{ ext4 } \ |
151 | 1 | Laurent GUERBY | mountpoint{ / } . |
152 | 1 | Laurent GUERBY | |
153 | 1 | Laurent GUERBY | partman-basicfilesystems partman-basicfilesystems/no_swap boolean false |
154 | 1 | Laurent GUERBY | d-i partman-basicfilesystems partman-basicfilesystems/no_swap boolean false |
155 | 1 | Laurent GUERBY | |
156 | 1 | Laurent GUERBY | # If you just want to change the default filesystem from ext3 to something |
157 | 1 | Laurent GUERBY | # else, you can do that without providing a full recipe. |
158 | 1 | Laurent GUERBY | d-i partman/default_filesystem string ext4 |
159 | 1 | Laurent GUERBY | |
160 | 1 | Laurent GUERBY | # This makes partman automatically partition without confirmation, provided |
161 | 1 | Laurent GUERBY | # that you told it what to do using one of the methods above. |
162 | 1 | Laurent GUERBY | d-i partman-partitioning/confirm_write_new_label boolean true |
163 | 1 | Laurent GUERBY | d-i partman/choose_partition select finish |
164 | 1 | Laurent GUERBY | d-i partman/confirm boolean true |
165 | 1 | Laurent GUERBY | d-i partman/confirm_nooverwrite boolean true |
166 | 1 | Laurent GUERBY | |
167 | 1 | Laurent GUERBY | ### Base system installation |
168 | 1 | Laurent GUERBY | ### Account setup |
169 | 1 | Laurent GUERBY | |
170 | 1 | Laurent GUERBY | d-i passwd/root-password password root |
171 | 1 | Laurent GUERBY | d-i passwd/root-password-again password root |
172 | 1 | Laurent GUERBY | |
173 | 1 | Laurent GUERBY | # To create a normal user account. |
174 | 1 | Laurent GUERBY | d-i passwd/user-fullname string guest |
175 | 1 | Laurent GUERBY | d-i passwd/username string guest |
176 | 1 | Laurent GUERBY | d-i passwd/user-password password guest |
177 | 1 | Laurent GUERBY | d-i passwd/user-password-again password guest |
178 | 1 | Laurent GUERBY | |
179 | 1 | Laurent GUERBY | |
180 | 1 | Laurent GUERBY | |
181 | 1 | Laurent GUERBY | # The installer will warn about weak passwords. If you are sure you know |
182 | 1 | Laurent GUERBY | # what you're doing and want to override it, uncomment this. |
183 | 1 | Laurent GUERBY | d-i user-setup/allow-password-weak boolean true |
184 | 1 | Laurent GUERBY | |
185 | 1 | Laurent GUERBY | # Set to true if you want to encrypt the first user's home directory. |
186 | 1 | Laurent GUERBY | d-i user-setup/encrypt-home boolean false |
187 | 1 | Laurent GUERBY | |
188 | 1 | Laurent GUERBY | ### Apt setup |
189 | 1 | Laurent GUERBY | # You can choose to install restricted and universe software, or to install |
190 | 1 | Laurent GUERBY | # software from the backports repository. |
191 | 1 | Laurent GUERBY | #d-i apt-setup/restricted boolean true |
192 | 1 | Laurent GUERBY | #d-i apt-setup/universe boolean true |
193 | 1 | Laurent GUERBY | #d-i apt-setup/backports boolean true |
194 | 1 | Laurent GUERBY | # Uncomment this if you don't want to use a network mirror. |
195 | 1 | Laurent GUERBY | #d-i apt-setup/use_mirror boolean false |
196 | 1 | Laurent GUERBY | # Select which update services to use; define the mirrors to be used. |
197 | 1 | Laurent GUERBY | # Values shown below are the normal defaults. |
198 | 1 | Laurent GUERBY | #d-i apt-setup/services-select multiselect security |
199 | 1 | Laurent GUERBY | #d-i apt-setup/security_host string security.ubuntu.com |
200 | 1 | Laurent GUERBY | #d-i apt-setup/security_path string /ubuntu |
201 | 1 | Laurent GUERBY | |
202 | 1 | Laurent GUERBY | # Additional repositories, local[0-9] available |
203 | 1 | Laurent GUERBY | #d-i apt-setup/local0/repository string \ |
204 | 1 | Laurent GUERBY | # http://local.server/ubuntu squeeze main |
205 | 1 | Laurent GUERBY | #d-i apt-setup/local0/comment string local server |
206 | 1 | Laurent GUERBY | # Enable deb-src lines |
207 | 1 | Laurent GUERBY | #d-i apt-setup/local0/source boolean true |
208 | 1 | Laurent GUERBY | # URL to the public key of the local repository; you must provide a key or |
209 | 1 | Laurent GUERBY | # apt will complain about the unauthenticated repository and so the |
210 | 1 | Laurent GUERBY | # sources.list line will be left commented out |
211 | 1 | Laurent GUERBY | #d-i apt-setup/local0/key string http://local.server/key |
212 | 1 | Laurent GUERBY | |
213 | 1 | Laurent GUERBY | ### Package selection |
214 | 1 | Laurent GUERBY | tasksel tasksel/force-tasks string standard,server,desktop |
215 | 1 | Laurent GUERBY | tasksel tasksel/first multiselect standard,server,desktop |
216 | 1 | Laurent GUERBY | |
217 | 1 | Laurent GUERBY | # Individual additional packages to install |
218 | 1 | Laurent GUERBY | d-i pkgsel/include string openssh-server tftp-hpa software-properties-common python-apt python-pycurl python-setuptools |
219 | 1 | Laurent GUERBY | # Whether to upgrade packages after debootstrap. |
220 | 1 | Laurent GUERBY | # Allowed values: none, safe-upgrade, full-upgrade |
221 | 1 | Laurent GUERBY | d-i pkgsel/upgrade select full-upgrade |
222 | 1 | Laurent GUERBY | |
223 | 1 | Laurent GUERBY | # Language pack selection |
224 | 1 | Laurent GUERBY | d-i pkgsel/language-packs multiselect en |
225 | 1 | Laurent GUERBY | |
226 | 1 | Laurent GUERBY | # No language support packages |
227 | 1 | Laurent GUERBY | d-i pkgsel/install-language-support boolean false |
228 | 1 | Laurent GUERBY | |
229 | 1 | Laurent GUERBY | # Policy for applying updates. May be "none" (no automatic updates), |
230 | 1 | Laurent GUERBY | # "unattended-upgrades" (install security updates automatically), or |
231 | 1 | Laurent GUERBY | # "landscape" (manage system with Landscape). |
232 | 1 | Laurent GUERBY | d-i pkgsel/update-policy select unattended-upgrades |
233 | 1 | Laurent GUERBY | |
234 | 1 | Laurent GUERBY | # Verbose output and no boot splash screen |
235 | 1 | Laurent GUERBY | d-i debian-installer/quiet boolean false |
236 | 1 | Laurent GUERBY | d-i debian-installer/splash boolean false |
237 | 1 | Laurent GUERBY | |
238 | 1 | Laurent GUERBY | ### Boot loader installation |
239 | 1 | Laurent GUERBY | # This is fairly safe to set, it makes grub install automatically to the MBR |
240 | 1 | Laurent GUERBY | # if no other operating system is detected on the machine. |
241 | 1 | Laurent GUERBY | d-i grub-installer/only_debian boolean true |
242 | 1 | Laurent GUERBY | |
243 | 1 | Laurent GUERBY | # This one makes grub-installer install to the MBR if it also finds some other |
244 | 1 | Laurent GUERBY | # OS, which is less safe as it might not be able to boot that other OS. |
245 | 1 | Laurent GUERBY | d-i grub-installer/with_other_os boolean true |
246 | 1 | Laurent GUERBY | |
247 | 1 | Laurent GUERBY | # Wait for two seconds in grub |
248 | 1 | Laurent GUERBY | d-i grub-installer/timeout string 2 |
249 | 1 | Laurent GUERBY | |
250 | 1 | Laurent GUERBY | # Use the following option to add additional boot parameters for the |
251 | 1 | Laurent GUERBY | # installed system (if supported by the bootloader installer). |
252 | 1 | Laurent GUERBY | # Note: options passed to the installer will be added automatically. |
253 | 1 | Laurent GUERBY | # d-i debian-installer/add-kernel-opts string vga=normal nomodeset audit=0 intel_idle.max_cstate=0 processor.max_cstate=1 cgroup_enable=memory swapaccount=1 |
254 | 1 | Laurent GUERBY | |
255 | 1 | Laurent GUERBY | ### Finishing up the installation |
256 | 1 | Laurent GUERBY | # Avoid that last message about the install being complete. |
257 | 1 | Laurent GUERBY | d-i finish-install/reboot_in_progress note |
258 | 1 | Laurent GUERBY | |
259 | 1 | Laurent GUERBY | #### Advanced options |
260 | 1 | Laurent GUERBY | ### Running custom commands during the installation |
261 | 1 | Laurent GUERBY | # d-i preseeding is inherently not secure. Nothing in the installer checks |
262 | 1 | Laurent GUERBY | # for attempts at buffer overflows or other exploits of the values of a |
263 | 1 | Laurent GUERBY | # preconfiguration file like this one. Only use preconfiguration files from |
264 | 1 | Laurent GUERBY | # trusted locations! To drive that home, and because it's generally useful, |
265 | 1 | Laurent GUERBY | # here's a way to run any shell command you'd like inside the installer, |
266 | 1 | Laurent GUERBY | # automatically. |
267 | 1 | Laurent GUERBY | |
268 | 1 | Laurent GUERBY | # This first command is run as early as possible, just after |
269 | 1 | Laurent GUERBY | # preseeding is read. |
270 | 1 | Laurent GUERBY | #d-i preseed/early_command string anna-install some-udeb |
271 | 1 | Laurent GUERBY | # This command is run immediately before the partitioner starts. It may be |
272 | 1 | Laurent GUERBY | # useful to apply dynamic partitioner preseeding that depends on the state |
273 | 1 | Laurent GUERBY | # of the disks (which may not be visible when preseed/early_command runs). |
274 | 1 | Laurent GUERBY | #d-i partman/early_command \ |
275 | 1 | Laurent GUERBY | # string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" |
276 | 1 | Laurent GUERBY | # This command is run just before the install finishes, but when there is |
277 | 1 | Laurent GUERBY | # still a usable /target directory. You can chroot to /target and use it |
278 | 1 | Laurent GUERBY | # directly, or use the apt-install and in-target commands to easily install |
279 | 1 | Laurent GUERBY | # packages and run commands in the target system. |
280 | 1 | Laurent GUERBY | #d-i preseed/late_command string \ |
281 | 1 | Laurent GUERBY | # in-target tftp 172.16.0.1 -c get postpreseed.sh; \ |
282 | 1 | Laurent GUERBY | # in-target chmod +x postpreseed.sh; \ |
283 | 1 | Laurent GUERBY | # in-target /bin/bash -x postpreseed.sh; \ |
284 | 1 | Laurent GUERBY | # in-target rm -f postpreseed.sh; |
285 | 1 | Laurent GUERBY | </pre> |
286 | 2 | Laurent GUERBY | |
287 | 3 | Laurent GUERBY | h3. default |
288 | 3 | Laurent GUERBY | |
289 | 3 | Laurent GUERBY | <pre> |
290 | 3 | Laurent GUERBY | root@c1:/var/lib/tftpboot/pxelinux.cfg# cat default |
291 | 3 | Laurent GUERBY | DEFAULT ubuntu-installer/amd64/boot-screens/vesamenu.c32 |
292 | 3 | Laurent GUERBY | |
293 | 3 | Laurent GUERBY | label Boot local disk |
294 | 3 | Laurent GUERBY | LOCALBOOT 0x80 |
295 | 3 | Laurent GUERBY | |
296 | 3 | Laurent GUERBY | label install |
297 | 3 | Laurent GUERBY | kernel ubuntu-installer/amd64/linux |
298 | 3 | Laurent GUERBY | append auto=true priority=critical initrd=ubuntu-installer/amd64/initrd.gz locale=en_GB.UTF-8 kbd-chooser/method=gb netcfg/choose_interface=auto url=tftp://10.2.137.101/preseed.cfg |
299 | 3 | Laurent GUERBY | </pre> |