{{>toc}}

h1. AirOS

http://en.wikipedia.org/wiki/List_of_WLAN_channels

http://wireless.kernel.org/en/developers/Regulatory

http://wireless.kernel.org/en/developers/Regulatory/Database

<pre>

Band [MHz]	Max BW [MHz]	Flags	Max antenna gain [dBi]	Max EIRP [dBm (mW)]

2402.000 - 2482.000	40.000		N/A	20.00 (100.00) => 80 MHz

5170.000 - 5250.000	40.000		N/A	20.00 (100.00) => 80 MHz

5250.000 - 5330.000	40.000	DFS	N/A	20.00 (100.00) => 80 MHz

5490.000 - 5710.000	40.000	DFS	N/A	27.00 (501.19) => 220 MHz 

(total 5 GHz 380 MHz, 5600-5650 = radar = 50 MHz)

</pre>

http://www.ubnt.com/wiki/RF_Compliance

For example, if you select  5805 MHz (40 MHz channel) and Below, the radio will use  (5775 to 5795 MHz) + (5795 to 5815 MHz), 

but if you select   5805 MHz (40 MHz channel) and Above, the radio will use  (5795 to 5815 MHz) + (5815 to 5835 MHz).

ath9k http://wenku.baidu.com/view/ac0523f57c1cfad6195fa7f4.html

Ubnt founder: http://www.forbes.com/forbes/2012/0116/entrepreneurs-robert-pera-computer-hardware-apple.html

h2. v5.3.5

http://wiki.ubnt.com/AirOS_5.3

Channel width 5/10/20/40

TX power min max dBm

Loco    4  23

NS      8  27

NB      4  23

Rocket  -4 27

LocoM2 5/10/20/40 dBm 5-23

h2. Comparaison

5.3.5 vs 5.5 

Linux version 2.6.15-5.2 (buildd@builder) (gcc version 4.1.2)  Mon Dec 19 20:46:46 EET 2011  (janvier 2006)

Linux version 2.6.32.54 (buildd@builder) (gcc version 4.1.2)  Fri Apr 6 14:56:27 EEST 2012 (decembre 2009)

6842240 May 19 17:07 XM-v5.3.5.build11245.bin

6472831 May 19 17:07 XM-v5.5.build12536.bin

h2. v5.5

http://www.ubnt.com/download#doc

http://www.ubnt.com/downloads/guides/airOS/airOS_UG_V55_3-20-12.pdf

Country Compliance Mode Frequency 4920 Mhz a 6100 MHz

Channel width 3/5/8/10/20/25/30/40

TX power min max dBm

Loco    4  23

NS     -4  27

NB     -8  23

Rocket -4  27

LocoM2 3/5/8/10/20/25/30/40 dBm 5-23 Freq 2312 a 2732 MHz (France 5/8/10/20/30/40 et 2412-2472)

IPv6 supported in command line ping6 fe80::xxx%br0 works

h2. Tagger les 2 ports ethernet sur firmware 5.5:

NB:La NS doit déjà fonctionner sans VLAN en mode bridge.

Onglet Network:

* Configuration Mode: Advanced

Dans "VLAN Network":

* Ajouter le LAN0 avec VLANID 12

* Ajouter le LAN1 avec VLANID 12

Dans "Bridge Network" pour le "Bridge0":

* Supprimer LAN0

* Supprimer LAN1

* Ajouter LAN0.12

* Ajouter LAN1.12

Et appliquer la configuration.

Voila il reste plus qu'à configurer la machine/router pour utiliser ce vlan.

Exemple avec linux:

<pre>

# ip link add link eth0 name eth0.12 type vlan id 12

# ip link set eth0.12 up

# ping6 -c1 fe80::31%eth0.12

PING fe80::31%eth0.12(fe80::31) 56 data bytes

64 bytes from fe80::31: icmp_seq=1 ttl=64 time=23.5 ms

--- fe80::31%eth0.12 ping statistics ---

1 packets transmitted, 1 received, 0% packet loss, time 0ms

rtt min/avg/max/mdev = 23.519/23.519/23.519/0.000 ms

</pre>

h2. AirView test

References:

* http://forum.ubnt.com/showthread.php?t=52560

* ETSI EN 301 893 v1.7.0 (2012-01)

* http://www.etsi.org/deliver/etsi_en/301800_301899/301893/01.07.00_40/en_301893v010700o.pdf

** See diagram page 17 of the ETSI PDF

Lab on table same room compliance mode 5.5

- one NSM5 AP WDS

- one LocoM5 STA WDS 1 meter from the NSM5

- one NBM5 head (without dish) right in between Loco and NS running AirView

Steps for each graph

# associate NS and Loco with new frequency and width

# clear airview

# launch 300 second iperf client between netbook behind NSM5 to iperf server on locoM5

# after iperf is done save airview screenshot

# go back to step 1

h3. First batch testing narrow channels 5240 with 5200-5300 airview:

* 3 MHz

 !5240-3.png!

* 5 MHz

 !5240-5.png!

* 8 MHz

 !5240-8.png!

* 10 MHz

 !5240-10.png!

* 20 MHz

 !5240-20.png!

h3. Second batch testing large channels 5300 with 5200-5400 airview:

* no emission to verify noise

 !5300-0b.png!

* 10 MHz

 !5300-10b.png!

* 20 MHz

 !5300-20b.png!

* 30 MHz

 !5300-30b.png!

* 40 MHz

 !5300-40b.png!